Work with probe

Oh boy, I am an idiot. Thanks Andy, forgot to do the FEATURES = 30 bit. Pays not to play with these things in the wee hours of the morning.

ok i have just installed probe_screen , am i correct in that the origins and locations of the screen buttons align for a Gantry router
rather than say a mill . as it feels to me that the xy directions are incorrect for a mill those being the x axis is left to right , and the y front to back.
i.e the x axis is the longer of the 2 , either that or my brain is taking to interperting incorrectly.

if so i can possibly see some configuration issues as it grows .
however excellent work ,loving it allready .

cncbasher wrote: ok i have just installed probe_screen , am i correct in that the origins and locations of the screen buttons align for a Gantry router
rather than say a mill . as it feels to me that the xy directions are incorrect for a mill those being the x axis is left to right , and the y front to back.
i.e the x axis is the longer of the 2 , either that or my brain is taking to interperting incorrectly.

If the x axis begins right to left, it is required to change only probe_screen.glade file, flip all X buttons relative to the central column

I don't seem to have the file probe_screen.glade or at least I can't find it. Can some one give me an idea were it might be?

thor44 wrote: I don't seem to have the file probe_screen.glade or at least I can't find it. Can some one give me an idea were it might be?

it is in the icons folder.

I noticed a couple of pages back that someone is having trouble using the probe tab when NGCGUI is installed on the same machine.
I have not seen that anyone has a resolution to this.

Is it still an issue, or is the a workaround?

Ray M.