ubuntu 14.04.1 linuxcnc help

Andy
All I have done is install necessary packages to make it work. I have attached script file here but it needs to be in the archive for everything to work that I have setup and one needs to follow the directions in readme. To satisfy your curiosity take a look at script yourself I have uploaded as text file you then can see what is installed and uspace dose work with Xenomai .

Tim March

This is actually really good. Im still a noob, but the instructions actually make sense. i see its a 32 bit build, which im running a 64 bit system. do you recommend me changing to a 32 bit system? Or is there an easy way of making it 64 bit?

tjmarch wrote: uspace dose work with Xenomai

Firstly, I applaud your efforts in trying to make things easy for folk.

However, I remain surprised by your claim that LinuxCNC works with Xenomai.

git.linuxcnc.org/gitweb?p=linuxcnc.git;a...2811079;hb=HEAD#l310

Is specifically looking for "PREEMPT RT" in the kernel name.

Do you have a Xenomai system configured at the moment? If so, what does dmesg say about posix realtime / non-realtime?(ie the messages here: git.linuxcnc.org/gitweb?p=linuxcnc.git;a...bc48665a300515b#l689 )

the answer is it only works with 32 bit systems

Andy
I am at work at this moment desktop at home is setup with Debian at this time with Rtai. When I get home tonight I will make LCNC clean boot into Xenomai then recompile. Then post here a answer for you.

Tim

do you work for redhat?