ubuntu 14.04.1 linuxcnc help

long story short, that was the beginning of a series of dependencies i need to make this work. if only the line sudo apt-get build-dep linuxcnc would work...
neways i need to configure the tcl lib
checking for tcl... tclConfig.sh not found, trying tcl.h and libs.
If it doesn't work try running ./configure --with-tclConfig=<path to tclConfig.sh>
ill give it a try but im ot sure which file this would have went to.

You need to install tcl8.6-dev and tk8.6-dev

They stopped packaging the config file with the main library, which causes the same problems in Jessie

regards

Razor_keen wrote: long story short, that was the beginning of a series of dependencies i need to make this work.

You can get a list of dependencies with dpkg-checkbuilddeps as described in section 2.4 here:
wiki.linuxcnc.org/cgi-bin/wiki.pl?Instal...est_updates_with_git

linuxcnc is installed! i will be posting the dependencies in ubuntu 14.04 linuxcnc instructions. if anyone can pls review these and tell me if we will be missing any run time dependencies, your help would be greatly appreciated.

Andy
thanks i will give it a try
jason

Andy
.config returned
no realtime kernel found!
But this cant be right. I installed linuxcnc after finding the dependencies through trial and error and got this
LinuxCNC is a software system for computer control of machine #
# tools such as milling machines. LinuxCNC is released under the #
# GPL. Check out www.linuxcnc.org/ for more details. #
# #
# #
# It seems that ./configure completed successfully. #
# This means that RT is properly installed #
# If things don't work check config.log for errors & warnings #
I will continue to test and debug, but which dialog is more likely to be right?
Thanks
Jason