Raspberry Pi 4 Tutorial - fatal error

Still trying to get over the hump of running configure..(just before the build steps in the tutorial).... ..here's my screen shot.....can some one point out the "obvious"

You main the part arround nano debian/configure ?
In my opinion nothing needs to be changed here. (unless I'm wrong)

I just skipped it and continued to the next step (Edit debian/control.bottom.in...)
I didn't got any problems with it and have a running linuxcnc now.

Back again after trying to move forward with the dpkg and build part of the tutorial install. Keep hitting brick wall...should I start over...back up to where kernel installed ok???? Or other. Here's a pic of what's on file but build fails ...sorry if too inexperience d to ask better question.

Good evening.

I'm raising an error at the stage where LinuxCNC is installed.

I would greatly appreciate if anyone could help me understand the error and how to proceed.

Command entered:
The following error raised:
dpkg-buildpackage -us -uc -ui failed

Here are more messages leading up to the error:
Installed in /home/pi/emc/src/../debian/tmp with prefix /usr
make[1]: Leaving directory '/home/pi/emc/src'
mkdir -p debian/tmp/usr/lib debian/tmp/usr/include/linuxcnc
cp lib/*.a debian/tmp/usr/lib
mkdir -p debian/tmp/usr/share/doc/linuxcnc-dev
mv debian/tmp/usr/share/doc/linuxcnc/LinuxCNC_Developer_Manual.pdf \
debian/tmp/usr/share/doc/linuxcnc-dev/
mv debian/tmp/usr/share/doc/linuxcnc/LinuxCNC_Developer_Manual_es.pdf \
debian/tmp/usr/share/doc/linuxcnc-dev/
cp docs/html/gcode*.html debian/tmp/usr/share/doc/linuxcnc/
rm -rf debian/tmp/usr/share/doc/linuxcnc/html
rm debian/tmp/linuxcnc*.files
rm -f debian/tmp/usr/share/doc/linuxcnc/examples/sample-configs/*/*position*.txt
(cd debian/tmp/usr/share/doc/linuxcnc/examples; \
ln -sf ../../../linuxcnc/ncfiles ./nc_files)
dh_movefiles
dh_movefiles: debian/tmp/usr/share/applications/linuxcnc-documentation-es.desktop not found (supposed to put it in linuxcnc-doc-es)
make: *** [debian/rules:83: install] Error 1
dpkg-buildpackage: error: fakeroot debian/rules binary subprocess returned exit status 2
debuild: fatal error at line 1182:
dpkg-buildpackage -us -uc -ui failed

As an update, I managed to get LinuxCNC to install without error. I'm only guessing, because I am new to all this, but this time I used the image of Raspbian Lite to which John has linked in his instructions. In the failed attempt, I used the latest Raspbian Lite version shown on the RPi site.

Just a guess.

Glad you got it working.
There is actually a (beta release) of an SD card image now available.
www.linuxcnc.org/iso
(look for the RPi Zip, then install in the usual RPi way)

But I haven't tested it yet.

For some reason it is configured to auto-login a user called "linuxcnc"


Part of the message is hidden for the guests. Please log in or register to see it.


This probably won't be the case in the final version.