ISO to test: Exegnulinux remasterd with LinuxCNC, a lots of tools and no systemd

More
5 years 6 months ago - 5 years 6 months ago #205615 by clifo
After reinstallation LCNC it works.

After adding "isolcpus = 2.3" to the GRUB PC freezes, only a hard reset will help.

MB: J3455M, 8Gb RAM, SSD 120Gb
Last edit: 5 years 6 months ago by clifo.

Please Log in or Create an account to join the conversation.

  • twoflowers
  • Topic Author
  • New Member
  • New Member
More
5 years 3 months ago - 5 years 3 months ago #214379 by twoflowers
Maybe some of you have read the ongoing debate about CoC & linuxcnc. Some people think they have to play policemen for the good of the others. Well, that's not my point of view. As there is no debate allowed over that topic and these policemen think their management bull***t is without alternative .. well, I think my remaster is not needed any more. I wish these policemen good luck in destroying commumities - they will prevail, without doubt.

So instead of a devuan chimera iso with linuxcnc 2.8.2 my repo will not be available any more. Say thank you to the policemen .. and don't forget: OBEY !
Last edit: 5 years 3 months ago by twoflowers.

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago #214399 by Grotius
Hi TwoFlowers,

Who is this so called "policeman"? And who is saying a debat about coc is not allowed?

P.s why are you giving up to provide your remaster version?

 

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago - 5 years 3 months ago #214407 by Aciera
Hm, I wasn't aware that there was an "ongoing" debate about coc. I know Beagle has voiced opposition in a thread but I don't recall that you have voiced your concerns there.
Maybe you can point me to the relevant thread?

[edit]
And just avoid a misunderstanding, beaglebrainz ASKED to be removed from the forum, he was NOT banned, even if that is what's written as his status.
Last edit: 5 years 3 months ago by Aciera.

Please Log in or Create an account to join the conversation.

  • twoflowers
  • Topic Author
  • New Member
  • New Member
More
5 years 3 months ago #214415 by twoflowers
The debate is running on the mailing list sourceforge.net/p/emc/mailman/message/37318678/ (I'm only following the forum from time to time) and if you follow that thread you'l find just 3 people that force CoC on all others. Conclusio of the debate till now: CoC is forced down your throat, it's vital for the project, it's perfect, all will prosper just because of CoC. The usual management BS. I can't stand that hypocrism. Their attitude is pure faschism (on the mailinglist you can find reference to Mussulini).

When the vital work of the policemen is more important than a working remaster ... be it. Policemen are good, I'm bad. So I pull the plug. Hopfully more people feel the same and set actions, otherwise this is another project gone south.

And that's why I give up on the remaster: Policemen can do a better job and above all politically correct. So I'd suggest they take the blue collar, roll up the sleeves and do a remaster. I just have never seen this happen. So better the users stand up and take control back. I don't think this will happen, either, but I would like to be surprised in this matter.

So that's the thing. Political tentacles have been placed into a tecnical project. I'm not willing to participate in this faschist NWO.

Please Log in or Create an account to join the conversation.

More
5 years 3 months ago #214417 by Aciera
I see. Unfortunate "debate", if it could be called such. Just the use of the term "faschism" in this context could be debated over for a very long time.
At the end of the day I think it's the people who own this domain and host the website who have to set the rules. While this may be the "official" forum for LinuxCNC it's not the only meeting place for users on the web.

Please Log in or Create an account to join the conversation.

Time to create page: 0.141 seconds
Powered by Kunena Forum