linuxcnc-2.8.0-pi4.img - no USB on raspberry pi 4 - 8GB & 2GB

hello
Do you still have the file? is no longer accessible.

MarcoDAIKOO wrote:

hello
Do you still have the file? is no longer accessible.

That link is out of date.

The official 32-bit version can be downloaded here
linuxcnc.org/downloads/

A 64-bit version with linuxcnc 2.8.2 can be downloaded here
drive.google.com/file/d/1sdFvmJx439lZQsq...jQE/view?usp=sharing

A recent 64-bit version of linuxcnc 2.9.0pre can be downloaded here
drive.google.com/file/d/1Vgj2rMgG_gdNWx_...Ix4/view?usp=sharing

will I need to change the Kernel for this version?

MarcoDAIKOO wrote:

will I need to change the Kernel for this version?

The links indicated by me refer to images to be written directly on the sd card.
These images contain both the operating system and the LinuxCNC and therefore are directly usable.
It is advisable to upgrade to have a better system

Not really full on topic, so, kindly accept my apologies if too far off. But: on a pi4: why bother on an sd-card? It boots straight off USB! I have several Pi4s, all of them just boot off USB.

Greez
chris

hello
for version 2.9 it is asking for password. which would it be?