1. LinuxCNC
  3. Installing LinuxCNC
  5. Last update of LinuxCNC Raspberry Pi4 USB does not work

Last update of LinuxCNC Raspberry Pi4 USB does not work

More
09 Jan 2021 16:16 #194602 by zz912
Last update of LinuxCNC Raspberry Pi4 USB does not work was created by zz912
Hello,

I used several month Pi4 + LinuxCNC + Mesa 7i96. All time it was working. I install image from here:
www.linuxcnc.org/iso/linuxcnc-2.8.0-pi4.zip

But the last update kill USB on RPI. RPI booted, but with out mouse and key I should only look on monitor. So, I had to make new image for SD card. It work again. I made "sudo apt-get update, upgrade" and after reboot the USB was killed again. I tried it several times.

I tried install:
downloads.raspberrypi.org/raspios_arm64/...os_arm64-2020-08-24/
USB worked. I tried reboot RPI several times and USB worked.
I tried install LinuxCNC:
linuxcnc.org/docs/2.8/html/getting-start...lling_on_raspbian_10
after reboot the RPI does not boot the system at all.

Can I ask anybodyfor help?

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 16:34 #194608 by tommylight
Replied by tommylight on topic Last update of LinuxCNC Raspberry Pi4 USB does not work
Title of the topic changed.
Why would you use such a miss leading and derogatory title?
Use the search function, there are at least two topics with the same subject here.
The following user(s) said Thank You: partec

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 16:34 - 09 Jan 2021 16:37 #194609 by partec
Replied by partec on topic Last update of LinuxCNC killing my Raspberry Pi4
sorry
Last edit: 09 Jan 2021 16:37 by partec.

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 16:36 #194610 by tommylight
Replied by tommylight on topic Last update of LinuxCNC Raspberry Pi4 USB does not work
www.google.com/search?source=hp&ei=SNv5X...XpA5oQ4dUDCAY&uact=5
The following user(s) said Thank You: partec

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 16:41 #194612 by zz912
Replied by zz912 on topic Last update of LinuxCNC Raspberry Pi4 USB does not work

Title of the topic changed.
Why would you use such a miss leading and derogatory title?


I'm sorry, I didn't mean to be rude. I am from the Czech Republic and my English is very bad.

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 16:44 #194613 by tommylight
Replied by tommylight on topic Last update of LinuxCNC Raspberry Pi4 USB does not work
Oh well we can blame google for that then ! :)
Ahoj Pane, jak se mate?

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 16:45 #194614 by tommylight
Replied by tommylight on topic Last update of LinuxCNC killing my Raspberry Pi4

sorry

For what ?
:)

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 16:53 #194615 by zz912
Replied by zz912 on topic Last update of LinuxCNC Raspberry Pi4 USB does not work

Ahoj Pane, jak se mate?

Mám se dobře, děkuji za optání. Jak se máte vy? Setkal jste se někdy ve svém životě s češtinou, nebo s Českou Republikou?

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 16:58 #194618 by tommylight
Replied by tommylight on topic Last update of LinuxCNC Raspberry Pi4 USB does not work
Jsem byl v cheskou, nejvic v Brne! :)

Please Log in or Create an account to join the conversation.

More
09 Jan 2021 17:02 - 09 Jan 2021 17:17 #194619 by zz912
Replied by zz912 on topic Last update of LinuxCNC Raspberry Pi4 USB does not work
A líbilo se Vám u nás? Jak dlouho jste u nás byl?

Klidně tohle vlákno můžete smazat, ať nedělá zde na fóru nepořádek.
Děkuji
Last edit: 09 Jan 2021 17:17 by zz912.

Please Log in or Create an account to join the conversation.

  1. LinuxCNC
  3. Installing LinuxCNC
  5. Last update of LinuxCNC Raspberry Pi4 USB does not work
Time to create page: 0.108 seconds
Powered by Kunena Forum