Amplifier Fault ECT60 Closed Loop

Dear Hakan, thank you for your reply.
Could you please give me hal and ini?
If you could, I would be the happiest person in the world.

Prepare for epic happiness.
It's a plasma system so many things are not needed/wanted in for example a milling machine.
The E7000 is my own ethercat torch height/io board, I'm rather confident you don't have that one. 

 
 

The world is so beautiful because of the good people and those we can love.
Master Hakan, thank you so, so much!

Actually, I did have a problem with the closed loop ECT60 in the beginning.
First start it was ok, second start it gave me Following Error. 
So before linuxcnc starts the encoder position is reset to zero.
My start script
This may not be the right way to solve this, but it seems to work and I stopped researching the problem.
 

Huuu Thanks you , you save my days !!!

Hello, Hakan. My Mama told me that if you receive help from someone,
you shouldn't just say thank you, but express it.
I wanted to thank you for your help with a small gift and propose a personal project, so I asked for your contact information,
but I can't find it.

Please contact me. You have no idea how much my mom nags.

My email is joshualee777-at-gmail-dot-com.