1. Forum
  3. Search

Advanced Search

Search Results (Searched for: )

  • Ehsan_R
  • Ehsan_R
26 Jan 2025 22:34
Replied by Ehsan_R on topic The jog speed reduction button on the touchscreen does not work.

The jog speed reduction button on the touchscreen does not work.

Category: Gmoccapy

Can you explain how I can do this?
Many thanks
  • Badwithcomputer
  • Badwithcomputer
26 Jan 2025 21:32
Replied by Badwithcomputer on topic Lathe toolchanger ratchet style

Lathe toolchanger ratchet style

Category: Basic Configuration

I have questions for you regarding how you used the m6start that you posted, i installed it for my cortini, it works but only if i call the tools in sequence...or is this how it works. Also if you have more pictures of your machine and what your doing with it , i would be very interested to see...many thanks
  • Studi
  • Studi's Avatar
26 Jan 2025 21:32
Replied by Studi on topic ViaConstructor - Free and Opensource CAM for Linux and Mac

ViaConstructor - Free and Opensource CAM for Linux and Mac

Category: CAD CAM

Hallo Meister, 
hab ein CDR angehängt. Mit CorelDRAW X5 erstellt.
Falls Du wieder erwarten was bestimmteres brauchst, lass es mich wissen.
Hoffe es klappt.
.txt hinter cdr entfernen........
Gruss Studi 


File Attachment:

File Name: OlliMeister.cdr.txt
File Size:18 KB
  • Jensner
  • Jensner
26 Jan 2025 21:30
Nach Update funktionieren unter Probe Basic die Pfeiltasten nicht mehr was created by Jensner

Nach Update funktionieren unter Probe Basic die Pfeiltasten nicht mehr

Category: Deutsch

Hallo Leute,

seit dem letzten Update funktionieren meine Pfeiltasten nicht mehr um die Fräse zu bewegen.
Habt Ihr nen Tipp wo ich da nachschauen könnte?
Grundsätzlich lassen sich die Achsen über den Touchscreen (Probe Basic) problemlos bewegen, nur eben nicht über die Pfeiltasten.

Viele Grüße
Jens 
  • Badwithcomputer
  • Badwithcomputer
26 Jan 2025 21:26
Replied by Badwithcomputer on topic Lathe toolchanger ratchet style

Lathe toolchanger ratchet style

Category: Basic Configuration

I have a cortini H105, runs under Mach3 as well as linux cnc, ihave installed the custom m6start that was posted for use with the rachet-pawl toolchanger (same 6 position turret)...it works well , ....but i am stumped as to why it only works when calling tools in squence for example tool 3 can only be propery seated on the lock after tool 2 has already been called... and so on so on.... if i call tools out at random the turret dosent lock down the tool at all...or is this how the code is suposed to work....many thanks
  • juliankoenig87
  • juliankoenig87
26 Jan 2025 21:01
Replied by juliankoenig87 on topic scurve trajectory planner

scurve trajectory planner

Category: General LinuxCNC Questions

Oh, forget about the cpu load. Its to late. I forgot that I tested the axis cycle time.
  • juliankoenig87
  • juliankoenig87
26 Jan 2025 20:32 - 26 Jan 2025 20:58
Replied by juliankoenig87 on topic scurve trajectory planner

scurve trajectory planner

Category: General LinuxCNC Questions

Hi Grotius,

I made a small test nc file for better testing. This is a video with my 4 axis test machine capable of:

- 100m/min velocity
- 1 g acceleration
- 6.000 rpm A axis
- wild acceleration of the A axis

My current project will be capable of 30m/min, 0,5 g and the A axis will be a turning axis (of curse with way less acceleration). So in my opinion the test machine is not sooooo way of.

Video

I try different feed override values and as you can see I set the max jerk nearly to maximum (as if there is no scurve).
The behaviour of the A axis is still strange. And as you can see I am able to stop the tp. but it seems that the planer works on and only the axis gui si stoped. Nevertheless strange.

Please feel free to mention if I am testing to wild! I can live with boundaries so to say.

Last thing I just realised. 2.9.3 need a few percentage of my cpu (i5 4570T), maybe 3 to 10%. 2.10 with your scure tp needs over 40% while in idle and up to 50% while running the program.
 
  • lkavan
  • lkavan
26 Jan 2025 20:27
Replied by lkavan on topic halviewer, go or no go?

halviewer, go or no go?

Category: General LinuxCNC Questions

Hi Grotius,
thanx for your help. I have checked halcmd source and I have found what I have looked for. HAL reading works!

 
  • Jdolecki
  • Jdolecki
26 Jan 2025 19:13
Lathe spindle question turning and milling. was created by Jdolecki

Lathe spindle question turning and milling.

Category: Turning

I want to replace my spindle motor with a servo.

How  does the servo driver know I want to switch from turning to position for milling?

Thanks
 
  • Vector
  • Vector's Avatar
26 Jan 2025 19:08
Replied by Vector on topic Trouble installing from a backup

Trouble installing from a backup

Category: Installing LinuxCNC

Entirely possible. I updated the old installation several times, but then I installed fresh with:
apt install linuxcnc-uspace linuxcnc-uspace-dev mesaflash
I would have thought that would be equivalent.
And, I didn't make any screen changes to the QtDragon, at least not that I was aware of.
  • tommylight
  • tommylight's Avatar
26 Jan 2025 19:02
Replied by tommylight on topic Post Processor for Linux CNC

Post Processor for Linux CNC

Category: Post Processors

What "machines"?
  • bellda101
  • bellda101
26 Jan 2025 18:55
Post Processor for Linux CNC was created by bellda101

Post Processor for Linux CNC

Category: Post Processors

Hi 
I am Getting Rhino Cam. Does anyone know which post processor that is available from MecSoft that will work with Linux CNC machines?
Thanks
Donnie Bell
  • Aciera
  • Aciera's Avatar
26 Jan 2025 18:01 - 26 Jan 2025 18:02
Replied by Aciera on topic Trouble installing from a backup

Trouble installing from a backup

Category: Installing LinuxCNC

Do you want me to move this over to the QTVCP section to have it more exposed to cmorley?
  • Aciera
  • Aciera's Avatar
26 Jan 2025 17:54 - 26 Jan 2025 17:59
Replied by Aciera on topic Trouble installing from a backup

Trouble installing from a backup

Category: Installing LinuxCNC

Looks like a problem with QTVCP:
[QTvcp.QTVCP.WIDGETS.DRO_WIDGET][[34mDEBUG[0m] axis number 3 not found in available-axis to joint conversion dict {0: 0, 1: 1, 2: 2, 4: 3, 5: 4} of widget: dro_axis_a (dro_widget.py:72)
[QTvcp.QTVCP.WIDGETS.STATUS_LABEL][[33mWARNING[0m] lbl_maxv_percent : no option recognised (status_label.py:162)
[QTvcp.QTVCP.WIDGETS.STATUS_LABEL][[33mWARNING[0m] lbl_max_rapid : no option recognised (status_label.py:162)
[QTvcp.QTVCP.WIDGETS.STATUS_LABEL][[33mWARNING[0m] lbl_runtime : no option recognised (status_label.py:162)
[QTvcp][[34mDEBUG[0m] Calling the handler file's initialized__ function (qtvcp:283)
[QTvcp][[41mCRITICAL[0m] Retry from Error Dialog
Qtvcp encountered an error. The following information may be useful in troubleshooting:
LinuxCNC Version : 2.9.0~pre1+git20230208.f1270d6ed7

Traceback (most recent call last):
File "/usr/bin/qtvcp", line 508, in <module>
_qtvcp = QTVCP()
^^^^^^^
File "/usr/bin/qtvcp", line 284, in __init__
window.handler_instance.initialized__()
File "/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py", line 148, in initialized__
self.init_widgets()
File "/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py", line 324, in init_widgets
self.adjust_stacked_widgets(TAB_MAIN)
File "/usr/share/qtvcp/screens/qtdragon/qtdragon_handler.py", line 1220, in adjust_stacked_widgets
self.w['dro_button_stack_%s'%i.lower()].setCurrentIndex(num)
~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3/dist-packages/qtvcp/qt_makegui.py", line 493, in __getitem__
return getattr(self, item)
^^^^^^^^^^^^^^^^^^^
AttributeError: 'VCPWindow' object has no attribute 'dro_button_stack_b'

Not sure but did you maybe update the original installation on the old PC at some point and have not done so on the new setup?
Displaying 18976 - 18990 out of 21693 results.
  1. Forum
  3. Search
Time to create page: 0.379 seconds
Powered by Kunena Forum