1. Forum
  3. Search

Advanced Search

Search Results (Searched for: )

  • Moutomation
  • Moutomation
25 Aug 2024 17:25
Replied by Moutomation on topic İnstall glade

İnstall glade

Category: Gmoccapy

How should I follow to save when I press the save button?
  • Moutomation
  • Moutomation
25 Aug 2024 17:24
Replied by Moutomation on topic İnstall glade

İnstall glade

Category: Gmoccapy

I have no idea how to make the save button
  • Aciera
  • Aciera's Avatar
25 Aug 2024 17:21
Replied by Aciera on topic İnstall glade

İnstall glade

Category: Gmoccapy

There is nothing that will automatically save in case of a powercut, so you will have to do with a save button. Not sure about the shutdown procedure as that usually requires elevated privileges.
  • Moutomation
  • Moutomation
25 Aug 2024 17:16
Replied by Moutomation on topic İnstall glade

İnstall glade

Category: Gmoccapy

Can gmoccapy be closed first and then the computer shut down when a button is pressed on the machine? If such a thing is possible, data can be recorded in this way.
  • Moutomation
  • Moutomation
25 Aug 2024 17:13
Replied by Moutomation on topic İnstall glade

İnstall glade

Category: Gmoccapy

Sometimes people using the machine cut off the electricity by directly turning off the button of the machine. Automatic saving after values ​​change. Or can I add a separate save button?
  • Aciera
  • Aciera's Avatar
25 Aug 2024 17:02
Replied by Aciera on topic İnstall glade

İnstall glade

Category: Gmoccapy

Why do you want this?
This is only if you wanted to catch a <ctrl>+c in the terminal it has no effect in gmoccapy.
  • Aciera
  • Aciera's Avatar
25 Aug 2024 16:44
Replied by Aciera on topic durchmesser stimmt nicht

durchmesser stimmt nicht

Category: Other User Interfaces

Probe_postgui.hal:22: Pin 'halui.mdi-command-00' does not exist


ini Datei unter [HAL] diese Zeile hinzufügen:
HALUI = halui

Ich gehe davon aus, dass du dies immernoch in deiner ini hast:
[HALUI]
MDI_COMMAND = G54
MDI_COMMAND = G55
MDI_COMMAND = G56
MDI_COMMAND = G57
MDI_COMMAND = G58
MDI_COMMAND = G59
MDI_COMMAND = G59.1
MDI_COMMAND = G59.2
MDI_COMMAND = G59.3

MDI_COMMAND = O <probe_toolchange>  CALL [1]
MDI_COMMAND = O <probe_toolchange>  CALL [2]
MDI_COMMAND = O <probe_toolchange>  CALL [3]

MDI_COMMAND = O <probe_x_plus>      CALL
MDI_COMMAND = O <probe_x_minus>     CALL
MDI_COMMAND = O <probe_y_plus>      CALL
MDI_COMMAND = O <probe_y_minus>     CALL
MDI_COMMAND = O <probe_z_minus>     CALL
MDI_COMMAND = O <probe_pocket>      CALL
MDI_COMMAND = O <probe_operations>  CALL [1]
MDI_COMMAND = O <probe_operations>  CALL [2]
MDI_COMMAND = O <probe_operations>  CALL [3]

MDI_COMMAND = O <probe_manual_set>  CALL [0]
MDI_COMMAND = O <probe_manual_set>  CALL [1]
MDI_COMMAND = O <probe_manual_set>  CALL [2]
MDI_COMMAND = O <probe_manual_set>  CALL [3]
MDI_COMMAND = O <probe_escape>      CALL

MDI_COMMAND = O <probe_calibration> CALL
  • Moutomation
  • Moutomation
25 Aug 2024 16:39
Replied by Moutomation on topic İnstall glade

İnstall glade

Category: Gmoccapy

I tried but I couldn't do it. How can I run this code to save with ctrl+c?


By default, the reaction of GladeVCP to a Ctrl-C event is to just exit - without saving state. To make sure that this case is covered, add a handler call on_unix_signal which will be automatically be called on Ctrl-C (actually on the SIGINT and SIGTERM signals). Example:

def on_unix_signal(self,signum,stack_frame):
print("on_unix_signal(): signal %d received, saving state" % (signum))
self.ini.save_state(self)
  • karlhe
  • karlhe
25 Aug 2024 16:03
Replied by karlhe on topic durchmesser stimmt nicht

durchmesser stimmt nicht

Category: Other User Interfaces

Hallo,

leider immer noch ein fehler..

karlhe
  • jroise
  • jroise
25 Aug 2024 15:56
Replied by jroise on topic newbie issues with mesa 5i20 and 7i36 daughtercard.

newbie issues with mesa 5i20 and 7i36 daughtercard.

Category: Driver Boards

Wow thanks!
I should upgrade my version anyways (I'm on EMC 2.3.2)
it looks like 2.9.3 is the most recent I'll upgrade to that.
  • tommylight
  • tommylight's Avatar
25 Aug 2024 15:15
Replied by tommylight on topic Plc Schneider

Plc Schneider

Category: User Exchange

It is all good, i moved it to "user exchange" section of the forum.
Thank you.
  • Jakemestre1
  • Jakemestre1's Avatar
25 Aug 2024 15:06
Replied by Jakemestre1 on topic Fanuc-Style Toolchange

Fanuc-Style Toolchange

Category: Advanced Configuration

Hi Andy,
I'm also having trouble setting up this T toolchange. I've got remap.py and toplevel.py in my config folder but when I run gmocappy I get an error file not open. I've remapped M6 as well and I'm wondering if they're conflicting with each other.  Any ideas to troubleshoot?   Thanks for all your help on everything known to linuxcnc.
  • Krulli_Fräser
  • Krulli_Fräser
25 Aug 2024 15:01
Replied by Krulli_Fräser on topic Editing Bitfile on 7i97t for extra smart serial connections

Editing Bitfile on 7i97t for extra smart serial connections

Category: Driver Boards

So like this right?
 
  • RIDO_JIMO
  • RIDO_JIMO
25 Aug 2024 14:59
Plc Schneider was created by RIDO_JIMO

Plc Schneider

Category: User Exchange

Hello, hope you are doing well!
I have a new Schneider PLC to sell, almost for free cause I bought it and I did not use it once because I abort the project, so I can sell cheap. 
If someone want it, we can talk in WhatsApp. 
If this goes against policy of this forum, pls delete the topic. 
Thank you 
​​​​​​
 
Displaying 23296 - 23310 out of 24339 results.
  1. Forum
  3. Search
Time to create page: 2.090 seconds
Powered by Kunena Forum