Advanced Search

But no matter what the value is set to or how I change the scale, the Mesa only ever outputs ~0.35V. Or are there jumpers or something similar on the Mesa hardware that I need to adjust?

Thank you so much for your help! I really appreciate it.

The output voltage should be PWMvalue/PWMscale

So if PWMscale is 10 the output voltage=PWMvalue

So it's December 31st 2025 and I am curious if Fusion 360 will actually stop working on my Windows 10
machine at 12:00am January 1st 2026.  As I write this message it's 3:20 pm and currently Fusion 360 is
still operational.  I will keep it logged on to Linuxcnc and Fusion 360 and update on my findings.
With that said I am sure it is already January 1st somewhere in the world . Has any one tried seeing if
Fusion 360 still works for them on Win 10?

i reused the original mayr safetycouplingers on my FP:
forum.zerspanungsbude.net/viewtopic.php?t=47794#p575058

Still looking for a freelancer to help get a tool sensor setup in software

Thanks guys. I am collecting up the wisdom of the crowd, and will try to work through everything systematically.

Doesnt work in sim either

That bug should be resolved in recent builds of the framework.  Its not a monokrom bug. It came out due to an errant print statement.

"What's the first rule?  Do NOT use print statements in the code.  Use LOG.debug"

I'm talking about the PWM value. So this value is a voltage value? Like 17V? I know how to limit this value. But I never measure this value on the Mesa. It's always only 0.35V as soon as I enable it.

The output voltage should be PWMvalue/PWMscale

How do you setup a tool sensor exactly? I cant seem get it right after a week of trial and error of setups, parameters changes. This is not a wiring issue or a debounce issue but a setup issue.

Current Setup:
LinuxCNC 2.9.4
2" tool sensor on the bed
Attached is my setup files

From this document  linuxcnc.org/docs/stable/html/gui/gmocca...uto-tool-measurement  I cant tell if I am doing something wrong or where the discrepancy is.

This example setup would cause the Z axis to come down to get to the -20 setpoint. This results in a crash into the probe and a "Probe tripped during a non-probe move" would appear. The solution to this was to set the Z to 0 so the probing search would start immediately

For this next issue is touch off x and y (not z because the document says to press "Block Height") I immediatly get a error when pressing x or y touch off. 

"G-code error in change.ngc near line 76, file ended with no percent sign(5) or program end (m2)"

Now if I just ignore these errors I get the same error when doing a tool change after it probes it. 
 

@rodw Thanks for the guide, it really helped me! And some Claude assistance

joshualee777,

Not sure if my Quick Reply was successful, so sorry for the duplicate post.

Hi! I've just successfully completed my initial test setup with a single JMC IHSV57. See github.com/rokoter/LinuxCNC/tree/main/ethercat/ihsv-homing. Hope it helps!

Launch LinuxCNC with cia402-ihsv-home-variant.ini
The Z startup error can safely be ignored

Yes, the value comes from the PID. My power amplifier is a -10/+10V. Is the value a voltage value? If the value is, for example, 17, I measure at the Mesa only 0.35V.

Hi! I've just successfully completed my initial test setup with a single JMC IHSV57. See github.com/rokoter/LinuxCNC/tree/main/ethercat/ihsv-homing. Hope it helps!

Launch LinuxCNC with cia402-ihsv-home-variant.ini
The Z startup error can safely be ignored