1. Forum
  3. Search

Advanced Search

Search Results (Searched for: )

  • Moutomation
  • Moutomation
23 Aug 2024 11:04 - 23 Aug 2024 13:32
Replied by Moutomation on topic İnstall glade

İnstall glade

Category: Gmoccapy

Can we make this pin persistent?
#<_hal[testpanel.hal_spinbutton1-f]>

 
  • DiegoVV
  • DiegoVV
23 Aug 2024 10:45
Erros: Unexpected realtime delay + 7i96s error finishing read was created by DiegoVV

Erros: Unexpected realtime delay + 7i96s error finishing read

Category: Installing LinuxCNC

Hi folks,

I´ve recently installed Linuxcnc 2.9.3 to run a BF20 milling machine equipped with a Mesa 7i96s.

PC-Mesa card communication is ok, tested both with ping and mesaflash tool.

I have configured the parameters in PCConf wizard with the appropriate IP (10.10.10.10), but when I start Linuxcnc I get these two errors....I am completely stuck:
  • Plasmanfm
  • Plasmanfm
23 Aug 2024 10:36
Replied by Plasmanfm on topic Sheetcam M 190

Sheetcam M 190

Category: Deutsch

Ich habe mich mal eingelesen….
..f#<_hal[plasmac.cut-feed-rate> Wird in der hal geholt pins
plasmac cut-feed-rate Wenn ich in der hal unter plasmac ein neuen pin erzeuge und die
Mat-Nummer zuweise dann könnte ich über ..m190 p#<_hal[plasmac.mat-nummer> theoretisch den M 190 Pn setzen?

King regarde
Juergen
  • DiegoVV
  • DiegoVV
23 Aug 2024 09:24
Replied by DiegoVV on topic Computer crashes after "Loading initial ramdisk"

Computer crashes after "Loading initial ramdisk"

Category: Installing LinuxCNC

Finally I did it.

Amazing support, thank you Tommylight!
  • Plasmanfm
  • Plasmanfm
23 Aug 2024 09:11
Replied by Plasmanfm on topic Sheetcam M 190

Sheetcam M 190

Category: Deutsch

Ok…
Verstehe ich das richtig ich habe also nur zwei Optionen im Sheetcam einsetzen oder den G-Code im Qplasmac zu änder ?

Okay...

Do I understand that correctly, so I only have two options to use in the sheetcam or to change the G-code in Qplasmac?

King regarde
Juergen
  • Moutomation
  • Moutomation
23 Aug 2024 09:07
Replied by Moutomation on topic İnstall glade

İnstall glade

Category: Gmoccapy

thanks a lot great
  • Aciera
  • Aciera's Avatar
23 Aug 2024 08:40 - 23 Aug 2024 08:40
Replied by Aciera on topic İnstall glade

İnstall glade

Category: Gmoccapy

Here:
 
 
  • mighty_mick
  • mighty_mick's Avatar
23 Aug 2024 08:33
Replied by mighty_mick on topic What's the Oddest Machine You Have Powered with LinuxCNC

What's the Oddest Machine You Have Powered with LinuxCNC

Category: Off Topic and Test Posts

Hi Todd, can you explain what does this machine do? I didnt understand.

Thanks.
  • Moutomation
  • Moutomation
23 Aug 2024 07:57 - 23 Aug 2024 07:58
Replied by Moutomation on topic İnstall glade

İnstall glade

Category: Gmoccapy

where is this page (I will put axis calibrations on this page)
 
  • Tinine
  • Tinine
23 Aug 2024 07:48 - 23 Aug 2024 09:42
Replied by Tinine on topic Retrofitting a small bending machine

Retrofitting a small bending machine

Category: CNC Machines

Hi
seem to have stumbled into a little project.
 

I have already retrofitted my Maho MH500 and a cycle lathe to Linuxcnc
retrofitted, which is why a friend has now asked me to have a look
to have a look at his bending machine.

The press was probably retrofitted to a newer control system.
However, it has now stopped working and when I switch it on I get the error message

"WARNING LOST VIDEO TABLES"
 


if I google this I only find 3 forum entries, but without any answer or even a solution.
I can't say whether the controller is broken or "just" lost the programming or parameters...

In any case, I now need a replacement.
A simple 3-axis positioning controller.
The controller would only have to control 2 stops and the press stop.

all 3 axes have analog -10/+10V drives
there are probably 3 encoders somewhere for the position feedback
and that's about it.

I don't need cycles and bending programs.
If we get the 3 axes into the desired position via the control system and
then operate the press hydraulically as usual is enough...


If the machine were in my shop, I would say
Linuxcnc Raspberry, small TFT mesa card and I operate the thing via Gcode in MDI.

Maybe there is a simpler standalone solution?
 

What is your time frame?
This might come across as ridiculous but I can handle the whole thing on a $10 RPi Pico 2 + support devices

This chip has "PIO state machines" and I am reading 4 quadrature encoders with a maximum rate > 5M quadrature counts/sec without using any of the two cores' processing power.

One core of the RP2350 MCU handles the servo PIDs + velocity profilers and the other core handles video. Motor command is 12-bit +-10v

I have been designing/building metal forming controls (up to 21 axes) since 1988 and this is my latest development. Right now I have a bunch of CNC tube-benders to retrofit with this thing (3-axis and 5-axis) and the control development is on-going.

Just thought I'd throw it out there. 
File Attachment:


Example of one of my tube bender retrofits  Microcontroller motion system and an Android tablet (protected) front-end
  • Aciera
  • Aciera's Avatar
23 Aug 2024 07:40 - 23 Aug 2024 07:43
Replied by Aciera on topic manual-toolchange-with-tool-length-switch sim fails mill upgraded to 2.9.2

manual-toolchange-with-tool-length-switch sim fails mill upgraded to 2.9.2

Category: AXIS

The glade panel is outdated, there is a pull request that fixes the issue:
github.com/LinuxCNC/linuxcnc/pull/3078/files

You can also manually replace the content in 'manualtoolchange.ui' with this:

<?xml version="1.0" encoding="UTF-8"?>
<!-- Generated with glade 3.38.2 -->
<interface>
<requires lib="gtk+" version="3.0"/>
<requires lib="gladevcp" version="0.0"/>
<object class="GtkWindow" id="window1">
<property name="can-focus">False</property>
<child>
<object class="GtkVBox" id="vbox1">
<property name="visible">True</property>
<property name="can-focus">False</property>
<child>
<object class="GtkBox">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="orientation">vertical</property>
<child>
<object class="GtkLabel" id="label2">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="margin-bottom">8</property>
<property name="xpad">0</property>
<property name="ypad">5</property>
<property name="label" translatable="yes">Manual Toolchange
with Probing</property>
<attributes>
<attribute name="font-desc" value="Sans Bold 12"/>
</attributes>
</object>
<packing>
<property name="expand">False</property>
<property name="fill">True</property>
<property name="position">0</property>
</packing>
</child>
<child>
<!-- n-columns=2 n-rows=1 -->
<object class="GtkGrid">
<property name="visible">True</property>
<property name="can-focus">False</property>
<child>
<object class="HAL_LED" id="change-led">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="margin-left">20</property>
<property name="led-blink-rate">0</property>
<property name="led-shape">2</property>
<property name="off-color">black</property>
<property name="on-color">orange</property>
<property name="pick-color-off">#000000000000</property>
<property name="pick-color-on">#c6c646460000</property>
<signal name="hal-pin-changed" handler="on_led_change" swapped="no"/>
</object>
<packing>
<property name="left-attach">0</property>
<property name="top-attach">0</property>
</packing>
</child>
<child>
<object class="GtkLabel" id="change-text">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="margin-left">10</property>
<property name="xpad">5</property>
</object>
<packing>
<property name="left-attach">1</property>
<property name="top-attach">0</property>
</packing>
</child>
</object>
<packing>
<property name="expand">False</property>
<property name="fill">True</property>
<property name="position">1</property>
</packing>
</child>
</object>
<packing>
<property name="expand">False</property>
<property name="fill">False</property>
<property name="position">0</property>
</packing>
</child>
<child>
<!-- n-columns=1 n-rows=3 -->
<object class="HAL_Table" id="enable">
<property name="visible">True</property>
<property name="can-focus">False</property>
<child>
<!-- n-columns=1 n-rows=2 -->
<object class="GtkGrid">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="halign">end</property>
<property name="valign">center</property>
<property name="row-spacing">5</property>
<child>
<object class="HAL_ToggleButton" id="reftool">
<property name="label" translatable="yes">Reference Tool</property>
<property name="visible">True</property>
<property name="can-focus">True</property>
<property name="receives-default">True</property>
<property name="margin-right">25</property>
<property name="image-position">top</property>
<property name="active">True</property>
<property name="draw-indicator">True</property>
</object>
<packing>
<property name="left-attach">0</property>
<property name="top-attach">0</property>
</packing>
</child>
<child>
<object class="HAL_Button" id="changed">
<property name="label" translatable="yes">Tool change complete</property>
<property name="visible">True</property>
<property name="can-focus">True</property>
<property name="receives-default">True</property>
<property name="margin-right">25</property>
<property name="image-position">top</property>
</object>
<packing>
<property name="left-attach">0</property>
<property name="top-attach">1</property>
</packing>
</child>
</object>
<packing>
<property name="left-attach">0</property>
<property name="top-attach">0</property>
</packing>
</child>
<child>
<object class="GtkFrame">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="margin-left">5</property>
<property name="margin-right">5</property>
<property name="margin-top">5</property>
<property name="margin-bottom">5</property>
<property name="label-xalign">0</property>
<child>
<object class="GtkAlignment">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="left-padding">12</property>
<child>
<!-- n-columns=2 n-rows=3 -->
<object class="GtkGrid">
<property name="visible">True</property>
<property name="can-focus">False</property>
<child>
<object class="HAL_LED" id="probing-led">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="margin-right">10</property>
<property name="led-blink-rate">5</property>
<property name="led-shape">2</property>
<property name="off-color">black</property>
<property name="pick-color-off"/>
<property name="pick-color-on">#1525ffff4fdc</property>
</object>
<packing>
<property name="left-attach">0</property>
<property name="top-attach">0</property>
</packing>
</child>
<child>
<object class="HAL_Button" id="probe-contact">
<property name="label" translatable="yes">Simulate probe contact</property>
<property name="visible">True</property>
<property name="can-focus">True</property>
<property name="receives-default">True</property>
<property name="margin-right">5</property>
</object>
<packing>
<property name="left-attach">1</property>
<property name="top-attach">0</property>
</packing>
</child>
<child>
<object class="HAL_Label" id="currlen">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="label" translatable="yes">label</property>
<property name="label-pin-type">1</property>
<property name="text-template">Current Z length: %f</property>
</object>
<packing>
<property name="left-attach">1</property>
<property name="top-attach">1</property>
</packing>
</child>
<child>
<object class="HAL_Label" id="reflen">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="label" translatable="yes">label</property>
<property name="label-pin-type">1</property>
<property name="text-template">Reference Z length: %f</property>
</object>
<packing>
<property name="left-attach">1</property>
<property name="top-attach">2</property>
</packing>
</child>
<child>
<placeholder/>
</child>
<child>
<placeholder/>
</child>
</object>
</child>
</object>
</child>
<child type="label">
<object class="GtkLabel">
<property name="visible">True</property>
<property name="can-focus">False</property>
<property name="xpad">10</property>
<property name="ypad">3</property>
<property name="label" translatable="yes">Tool probe</property>
</object>
</child>
</object>
<packing>
<property name="left-attach">0</property>
<property name="top-attach">1</property>
</packing>
</child>
<child>
<placeholder/>
</child>
</object>
<packing>
<property name="expand">False</property>
<property name="fill">True</property>
<property name="padding">3</property>
<property name="position">1</property>
</packing>
</child>
</object>
</child>
</object>
</interface>
 
[edit]
With this there is no longer any need to change "hal_widgets.py" or "hal_python.xml"
  • Aciera
  • Aciera's Avatar
23 Aug 2024 07:18
Replied by Aciera on topic İnstall glade

İnstall glade

Category: Gmoccapy

If you mean the 'Calibration' program from the bottom row in the settings page of gmoccapy, that is one of the external programs common to all GUIs. The source code for that can be found in the '/tcl' folder.
  • DPFlex
  • DPFlex
23 Aug 2024 07:03
Replied by DPFlex on topic manual-toolchange-with-tool-length-switch sim fails mill upgraded to 2.9.2

manual-toolchange-with-tool-length-switch sim fails mill upgraded to 2.9.2

Category: AXIS

Hello,
Last time with LCNC 2.9.2, it worked.
But now I upgraded to LCNC 2.9.3, it can not work again.
Can "hal_widgets.py" and "hal_python.xml" still be ok ?.
Thank you.
  • seyad
  • seyad
23 Aug 2024 05:28
Replied by seyad on topic Ethercat installation from repositories - how to step by step

Ethercat installation from repositories - how to step by step

Category: EtherCAT

Thank you. yeah its working now . But it doesn't contain ethercat in it, is it..?
  • cmorley
  • cmorley
23 Aug 2024 05:09
Replied by cmorley on topic QTDragon HD spindle incrementally increase/decrease speed

QTDragon HD spindle incrementally increase/decrease speed

Category: Qtvcp

from the docs:
linuxcnc.org/docs/devel/html/gui/qtdragon.html#_stylesheets

press F12 an editor will show for the style sheet:
 

press the 'copy to edit tab' and then edit as you please.
apply to test.
Then save for next time. The view tab should show the path/filename of the stylesheet that qtdragon will use.
 
Displaying 23581 - 23595 out of 24288 results.
  1. Forum
  3. Search
Time to create page: 0.500 seconds
Powered by Kunena Forum