1. Forum
  3. Search

Advanced Search

Search Results (Searched for: )

  • vre
  • vre
05 May 2025 13:11
Replied by vre on topic NativeCam on LinuxCNC 2.9.3

NativeCam on LinuxCNC 2.9.3

Category: NativeCAM

I have installed and works except lathe.
Why this project stalled ?
  • jochen91
  • jochen91
05 May 2025 13:09
Replied by jochen91 on topic Planning to Retrofit a Mazak Integrex200Y Mill-Turn Machine

Planning to Retrofit a Mazak Integrex200Y Mill-Turn Machine

Category: Advanced Configuration

Hello,
so after some digging around i found the Doosan G Code explanation sheet. I uploaded it into my GitHub so everybody can access it. It was a pain in the **** to get it.

github.com/jochenr91/Integrex

It explains every G-code the machine accepts. Including G400 starting on Page 155 (Page 157 with example pictures).

Also interessting: The Doosan Machine exepts G68:

Three-dimensional coordinate conversion without B-axis rotating (G68.1/G69.1)
Three-dimensional coordinate conversion with B-axis rotating (G368/G369)

The question is how to implement it into the PP or replace G400 in the PP. I get the benefits of using G400. But i don't need this functionality, at least to get things running. On the long run of course it would be quite nice, cause this is one of the huge benefits of a mill turn. Since this G code works with the tool offsets automatically it should be used by the motion planner?!

But yes the touch off should be at  B0.




 
  • snowgoer540
  • snowgoer540's Avatar
05 May 2025 12:29
Replied by snowgoer540 on topic Zero Pierce delay After pierce Only

Zero Pierce delay After pierce Only

Category: Plasmac

Last I checked this still worked, let me know if you encounter any issues:

linuxcnc.org/docs/devel/html/plasma/qtpl...#_material_converter
  • snowgoer540
  • snowgoer540's Avatar
05 May 2025 12:25
Replied by snowgoer540 on topic Job not showing in position - 2.9.4 - v2.9-238.315

Job not showing in position - 2.9.4 - v2.9-238.315

Category: Plasmac

Can you post the original gcode file you’re having issues with please?
  • DarkPhoinix
  • DarkPhoinix
05 May 2025 10:48
Replied by DarkPhoinix on topic TB6560 jp-1635a driver pin connection to NVEM v5

TB6560 jp-1635a driver pin connection to NVEM v5

Category: Driver Boards

I'm almost certain that the problem with the stepper's jerky movement that I'm having is the ENABLE pin not connected. I tried connecting it to +com with no success. I would like to try connecting it to a GND but I'm afraid of causing damage. Does anyone know where I can connect it to ground without causing damage?
  • Rune_cnc
  • Rune_cnc
05 May 2025 10:22
Replied by Rune_cnc on topic Using npn Inductive sensor for end stop.

Using npn Inductive sensor for end stop.

Category: Basic Configuration

I think this is where my confusion comes in.

Because i only have one pin to use.
The home input.

I hooked up an external power supply.
And a switch from the positive lead.

Would this be the correct ting to do. Attachement 1.
Or do I need to add an extra resistor prior to the pin in or prior to npn signal.


Feeling like swimming with no land in site.

So im must be going about this the wrong way.
My brain hurts trying to think about this.
Im honestly trying.

Maybe best to get some other switches.
  • RNJFAB
  • RNJFAB
05 May 2025 10:14 - 05 May 2025 10:30
Replied by RNJFAB on topic Job not showing in position - 2.9.4 - v2.9-238.315

Job not showing in position - 2.9.4 - v2.9-238.315

Category: Plasmac

tool is fine.

Attached photo of where it has decided to put this job.
  • DarkPhoinix
  • DarkPhoinix
05 May 2025 09:19
Replied by DarkPhoinix on topic Remora - ethernet NVEM / EC300 / EC500 cnc board

Remora - ethernet NVEM / EC300 / EC500 cnc board

Category: Computers and Hardware

My project is slowly progressing. I've put together a few things using examples and AI.
Warning: Spoiler!

AI does not exist, it is just a big script with access to a huge database of data. Most of the time it responds randomly. It only helps you if you know, for example, C++ very well and then you have to correct all the errors it makes ... basically you have to re-do everything yourself.

I advise you to never use it again, it is a scam!
  • hans48
  • hans48
05 May 2025 09:19
Replied by hans48 on topic Ein Neuling sucht Hilfe

Ein Neuling sucht Hilfe

Category: Deutsch

Hallo
Habe nicht gesehen Das noch wer einen Fehler gefunden hat (PCW) Danke das war der Fehler, somit dreht sich die Spindel. Habe das mindestens 5 mal angeschaut bis ich gesehen habe das das L fehlt.
Danke nochmal allen die geholfen haben.
PS: Habe die Software so mit den fehlern bekommen.
  • Aciera
  • Aciera's Avatar
05 May 2025 08:58 - 05 May 2025 08:58
Replied by Aciera on topic Planning to Retrofit a Mazak Integrex200Y Mill-Turn Machine

Planning to Retrofit a Mazak Integrex200Y Mill-Turn Machine

Category: Advanced Configuration

Looks like G368/G369 can be handled by the TWP functionality.
G400 is different as it transforms the tool offset rather than the tool position.
I'm not very familiar with cnc turning so I have little idea how linuxcnc handles the tool orientation as set in 'R' and 'K' words. There is this document which also refers to tool orientation but I have really no idea if this is actually used in motion planning or only in the GUI.
linuxcnc.org/docs/html/lathe/lathe-user.html
I'd say it's certainly possible to recreate this using a python remap.
Note though that even Doosan suggest that it is more accurate to touch off the tool at the b-axis angle used in the operation.
  • jjdege
  • jjdege's Avatar
05 May 2025 08:11 - 05 May 2025 08:12
Replied by jjdege on topic Remora - ethernet NVEM / EC300 / EC500 cnc board

Remora - ethernet NVEM / EC300 / EC500 cnc board

Category: Computers and Hardware

sorry
in custom file 2025-05-05.hal
try with
loadrt remora-eth-3.0 PRU_base_freq=500000
  • hans48
  • hans48
05 May 2025 07:51
Replied by hans48 on topic Ein Neuling sucht Hilfe

Ein Neuling sucht Hilfe

Category: Deutsch

Hallo
Habe den Fehler ausgebessert, hat leider nichts gebracht.  Leider habe ich vom Prgrammieren sehr wenig kenntnisse.
Was könnt ihr vorschlagen um die Befehle besser zu verstehen? Welchen Editor soll man nehmen?
Bin ein älterer Typ der was sich schon schwer tut (77).
Gruß Hans und Danke für eure Geduld.
  • jochen91
  • jochen91
05 May 2025 07:47 - 05 May 2025 07:52
Replied by jochen91 on topic Planning to Retrofit a Mazak Integrex200Y Mill-Turn Machine

Planning to Retrofit a Mazak Integrex200Y Mill-Turn Machine

Category: Advanced Configuration

I did model up a test piece in Fusion:

The machine type selected in the PP was PUMA MX.

Warning: Spoiler!


It look like only G400/G368/G17 and G18 is used.You said that G17,G18 and G368 can be replaced with G68.3 and G53.1 which i understand, but what about G400 ? (Functionality is documented in the .pdf). I think if those GCodes changes are implemented into the PP. The Doosan PP is sorta ready for LCNC (besides various M-codes).I can't test the TCP behavior of the PP since i don't have the manufacturing extension for Fusion.

Kind regards,
Jochen 
  • Hakan
  • Hakan
05 May 2025 06:05
Replied by Hakan on topic Lcnc & Ethercat data types, Ethercat automated hal pin setup.

Lcnc & Ethercat data types, Ethercat automated hal pin setup.

Category: General LinuxCNC Questions

I got 64-bits float implemented in the EtherCAT driver when I asked for it, lcec and lcec_conf. Quickly and not a big problem.
64-bits integers are needed for EtherCAT. When there is a push to move to 64-bit integers in linuxcnc,
we should jump on that opportunity.
"Don't know the consequences" is the worst reason ever, one finds out the consequences and then decide.
Turn "unexpected consequences" to "expected consequences" and work on them.
I can myself see how that can be done and if I can think of one solution there is always more ways to solve it.
And its not like we are reducing the capabilities like going from 32-bit to 16-bit, well that I would have been against,
but we are expanding capabilities.
Is memory size an issue? Well someone need to find out the storage needed for 32-bit integers and double that. Is that an issue?
It was possible to introduce joints, that must have been a much larger surgical operation than just changing the size of a data type.
Besides, floats used to be 32-bit, was changed in 2.6(?) to 64-bits and we survived.

EtherCAT has some other data types, like time and day, strings, arrays of bytes and ints. Some are handled like arrays; date and strings aren't.
 
Displaying 15406 - 15420 out of 17604 results.
  1. Forum
  3. Search
Time to create page: 0.755 seconds
Powered by Kunena Forum