Advanced Search

Hi,
it seems that your glade file is corrupted somehow. If I look at the glade file in 2.9.4: github.com/LinuxCNC/linuxcnc/blob/v2.9.4...ccapy/gmoccapy.glade - I can't find those duplicates.

How did you install LinuxCNC 2.9.4? Directly from the ISO image or updated from 2.9.3 or earlier?
 

Enjoy your holiday.

zz912 wrote:

I would like to return to my original question. How is it possible to reference files in source codes? Does anyone know? Or at least have some guidance?

forum.linuxcnc.org/gmoccapy/55011-lcnc-2...-g43?start=10#320387

Let me have a look when I am back from holiday...

zz912 wrote:

 
Could be possible read notifies from release_notes.txt?
github.com/LinuxCNC/linuxcnc/blob/master...py/release_notes.txt

Possible, but it would be a very long list if someone is updating e.g. from 2.8.0 to 2.9.4.
Therefore I only want to add infos that one really need to pay attention at.

I'm writing about the slider next to the hare icon. I have 250 in TRAJ and the scale on the slider is up to 15000. I have linuxcnc 2.9.2 and gmoccapy 3.4.6

Was this an one time fault or did it happen again with this g-code file? Or also with other files?

The easiest way to get the last line is to monitor the pin gmoccapy.program.current-line with halscope.

I bet you will get a nice pcb when you are done, keep up the good work.

Which version have you installed?
I guess you are talking about the slider that controls the jog velocity? This slider gets its max value from [TRAJ] MAX_LINEAR_VELOCITY , see  linuxcnc.org/docs/html/gui/gmoccapy.html#gmoccapy:traj-section
 

Thanks Chris,

Yes, that is what I meant. I am using 2.9.4 and the HD version of QTDragon.

No hurry at all. I've got my m6remap working really well. It allows using a mix of fixed and variable length tools where the variable length ones get automatically measured during the manual tool change. I'm just adding the finishing touches. I use this in conjunction with Basic Probe.

Thanks again.
John

I took a look and was able to add shift modifer which will make shift key use the max velocity ini setting as the override speed. I tested here and it works in all levels of safety, I need a few independent tests done before i push to the develop branch.

Hello
I have gmoccapy installed the problem is that the feed bar in manual mode has inflated values compared to those defined in the ini file. I don't know if this is supposed to be the case or do I need to change something in my configuration?

Here is a video of the system: 

tommy, idk, isn't linuxCNC built on python?

Those lines won't work in the remap (if that is what you meant) you would need to connect those to a HAL pin in qtdragon, then read the pins n the remap. I'm at work right now but will see if I can make a sample file for qtdragon tonight. You use master and regular or HD dragon?

If you want to change lots of button text, it's probably better to use translation process. See here:
linuxcnc.org/docs/devel/html/gui/qtdrago...internationalisation

You can do this to change the text even to different English names.

If it's just a few then stylessheets is less involved but you would need to use designer to see the button text or search the .ui file.

It's strange because it has always worked like this for me in Probe Basic and also previously using other interfaces.
Is there any possibility of continuing to use it?