Tumbler Build - For cleaning plasma cut parts.

More
5 years 10 months ago #193531 by rodw
Replied by rodw on topic Tumbler Build - For cleaning plasma cut parts.
For 2021, SWS should adopt Vista Green as their official machine colour in memory of the now defunct Australian Hercus Lathe. Darn, I was so close to buying one from the 1990's the other day at Hare and Forbes for $1200. What a bargain it was! What a quality precision tool. And metric too! Green is good!
The following user(s) said Thank You: thefabricator03

Please Log in or Create an account to join the conversation.

  • thefabricator03
  • Visitor
  • Visitor
5 years 9 months ago #196313 by thefabricator03
Replied by thefabricator03 on topic Tumbler Build - For cleaning plasma cut parts.
Progress has been slow again with family and full time work commitments getting in the way,

Wired up the machine temporarily so I can run it, I still have to finish the control box wiring and program the PLC and HMI.




Finished the roof and screwing down the sheet metal,

Please Log in or Create an account to join the conversation.

  • tommylight
  • Away
  • Moderator
  • Moderator
More
5 years 9 months ago #196325 by tommylight
Replied by tommylight on topic Tumbler Build - For cleaning plasma cut parts.
Looking niceeeee ! :)
The following user(s) said Thank You: thefabricator03

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.157 seconds
Powered by Kunena Forum