Post Processor for LinuxCNC and PlasmaC

What version of QtPlasmaC are you using? It should be in the title bar.

EDIT: And/Or: Could you post the file you are trying to cut?

sm2wmv wrote:

Code:

self.w.materialTempPin.set(0)

You need to update, that pin name error was fixed on April 29

This topic is kind of old, not sure if it applies to QTPlasmaC, does it?

Also, I don't have latest version of SheetCam (mine is 6.0) and I see old PP distributed with it, where can I find a PP that works with newest QTPlasmaC + old SheetCam ?

fernandosf wrote:

This topic is kind of old, not sure if it applies to QTPlasmaC, does it?

Also, I don't have latest version of SheetCam (mine is 6.0) and I see old PP distributed with it, where can I find a PP that works with newest QTPlasmaC + old SheetCam ?

The PP that is being used is plasmac  in sheetcam. IT works for QTPlasmaC and plasmaC. Hoever the plasmaC PP does not come with the latest version of sheetcam for linux, it is provided in Sheetcam for windows. I had to download the windopws version to get it. Someone should post  and sticky it, cause every other day someone is looking for it.

The Plasmac post ptocessor is included int a beta release for linux you can download from here
forum.sheetcam.com/viewtopic.php?f=5&t=8651

Using the Windows version in an airconditioned office and transferring files to the machine by FTP is my preference

I am usi g the windows sheetcam PP in linux sheetcam and it is working.
Is this a bad thing to do?