THCAD
22 Apr 2020 15:19 - 22 Apr 2020 15:21 #165119
by taloot
i cant find any manual, for using THCAD with paraport...
whats the float pin for voltage... when i use paraport ?
im trying to use my stm32 as plasma THC but on paraport. not on mesa...
for mesa i know the pin but for parport i cant find it
i will test it on paraport , pci,.. not sacrificing the FPGA board
@tommylight
Tom, have you successfully run a THCD into a parport?
If so would you mind sharing the connections and settings, I would like to add them into the docs.
i cant find any manual, for using THCAD with paraport...
whats the float pin for voltage... when i use paraport ?
im trying to use my stm32 as plasma THC but on paraport. not on mesa...
for mesa i know the pin but for parport i cant find it
i will test it on paraport , pci,.. not sacrificing the FPGA board
Last edit: 22 Apr 2020 15:21 by taloot.
Please Log in or Create an account to join the conversation.
22 Apr 2020 15:24 #165120
by taloot
thc-encoder-vel encoder.0.velocity => torchud.encoder-in
u mean one of thoseFound it, it's in the torchud.hal.
thc-encoder-vel encoder.0.velocity => torchud.encoder-in
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 19313
- Thank you received: 6466
22 Apr 2020 15:38 #165125
by tommylight
Replied by tommylight on topic THCAD
net enc-phase-a <= parport.0.pin-13-in
setp encoder.0.counter-mode 1
net enc-phase-a encoder.0.phase-A
net thc-encoder-vel encoder.0.velocity => torchud.encoder-in
setp encoder.0.counter-mode 1
net enc-phase-a encoder.0.phase-A
net thc-encoder-vel encoder.0.velocity => torchud.encoder-in
The following user(s) said Thank You: taloot
Please Log in or Create an account to join the conversation.
Moderators: snowgoer540
Time to create page: 0.242 seconds