I just tried to install probe basic and was able to but when i try to launch it i get the following error Traceback (most recent call last):File "/usr/bin/probe_basic", line 8, in <module>sys.exit(main())~~~~^^File "/usr/lib/python3/dist-packages/probe_basic/__init__.py", line 20, in mainqtpyvcp.run_vcp(opts, VCP_CONFIG_FILE)~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^File "/usr/lib/python3/dist-packages/qtpyvcp/__init__.py", line 26, in run_vcprun(*args, **kwargs)~~~^^^^^^^^^^^^^^^^^File "/usr/lib/python3/dist-packages/qtpyvcp/app/__init__.py", line 129, in runlaunch_application(opts, config)~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 70, in launch_applicationapp = _initialize_object_from_dict(config)File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 205, in _initialize_object_from_dictobj = _get_object_by_referance(provider)File "/usr/lib/python3/dist-packages/qtpyvcp/app/launcher.py", line 193, in _get_object_by_referancereturn getattr(importlib.import_module(modname), attrname)~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^File "/usr/lib/python3.13/importlib/__init__.py", line 88, in import_modulereturn _bootstrap._gcd_import(name[level:], package, level)~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^File "<frozen importlib._bootstrap>", line 1387, in _gcd_importFile "<frozen importlib._bootstrap>", line 1360, in _find_and_loadFile "<frozen importlib._bootstrap>", line 1331, in _find_and_load_unlockedFile "<frozen importlib._bootstrap>", line 935, in _load_unlockedFile "<frozen importlib._bootstrap_external>", line 1026, in exec_moduleFile "<frozen importlib._bootstrap>", line 488, in _call_with_frames_removedFile "/usr/lib/python3/dist-packages/qtpyvcp/app/application.py", line 7, in <module>import impModuleNotFoundError: No module named 'imp'
 p, li { white-space: pre-wrap; }

after unfortunatly I receive the same error mesage: unfortunatly in german but basically libtool autoconf, ... can not be installed
I tried to install libtool individually: and I get the error message: (my translation)

where do you mean that? @tommylight
In the networkmanager on the ethernet conection ?

1. Yes its set to that ( had that problem in the past but the forum helped with that)
2. Check the picture pls.

Thanks for answer.
I built 2.10 successfully on a RP4 but I don't dare to try on the router.
I will wait for the next update.
PW

So, it doesn't work.

To begin with, we had to solve the problems of inaccuracy of the installation description instructions. The downloaded attribute immediately after installation shows us v2.9.7 userspace. In order to install 2.9.2 rt you had to -

1. Overcome the distribution configuration error by removing the file stub for the raspberry -
forum.linuxcnc.org/38-general-linuxcnc-q...d-apt-problem#332403
sudo rm /etc/{initramfs/post-update.d/,kernel/{postinst.d/,postrm.d/}}z50-raspi-firmware

2.then you need to fix the first line of the file by adding 2.9-rt to its end
vi /etc/apt/sources.list.d/linuxcnc-uspace.list
deb [arch=amd64,arm64 signed-by=/etc/apt/trusted.gpg.d/linuxcnc.gpg.key.binary.gpg] www.linuxcnc.org/ bookworm base 2.9-uspace 2.9-rt

3. then you need to completely remove version 2.9.7
forum.linuxcnc.org/9-installing-linuxcnc...tall-rtai-got-errors
-
apt-get purge linuxcnc-uspace
apt-get purge linuxcnc-doc*

4. then you need to put the kernel (and only the kernel!)
wget www.linuxcnc.org/dists/bookworm/base/bin...ai-amd64-2_amd64.deb
dpkg -i linux-image-5.4.258-rtai-amd64_5.4.258-rtai-amd64-2_amd64.deb

5. This new kernel will now appear in boot options, you need to reboot the computer by selecting this particular kernel 5. And only now supply additional components -
wget www.linuxcnc.org/dists/bookworm/base/bin...xcnc-delta_amd64.deb
dpkg -i rtai-modules-5.4.258_5.3.3-linuxcnc-delta_amd64.deb

Now you can apt-get update + apt-get update

A running real-time kernel will always show 100% CPU load and does not need a swap. latensy-test starts and shows normal numbers.

An attempt to start the existing machine configuration leads to a system crash and reboot. Okay, stepconf and I create a new configuration, extremely simple. I launch it and also get a reboot.

Debug file information:
/usr/bin/linuxcnc: line 977:913 Segmentation error $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS
/usr/bin/milltask exiting

How to overcome this problem?
A discussion of the problem has been initiated here, but there is no solution
forum.linuxcnc.org/18-computer/51070-fro...-kernel-rtai-5-4-258

That looks like it should work, although it's a bit odd because it looks like a
fairly old version of LinuxCNC (before the changes to support multiple spindles)

I would next check the PWM value and enable pins in halshow when you expect
the spindle to be running and say set for 1/2 full speed:

hm2_7i95.0.pwmgen.00.enable
hm2_7i95.0.pwmgen.00.value

The error shows a basic communication issue.

1. Is the 7I95T jumpered for a 10.10.10.10 IP address

2. What does the command:

ip a

(typed in a terminal window) return?

Hi all can anyone tell me where to find "linuxcnc_2.9.4-amd64.hybrid.iso" cheksum? 
is it " ?? have a nice day all