- Hardware & Machines
- CNC Machines
- Milling Machines
- Prototrak Plus Retrofit with Mesa 7i77 & 5i25 cards
Prototrak Plus Retrofit with Mesa 7i77 & 5i25 cards
27 Jan 2020 16:01 - 27 Jan 2020 16:33 #155926
by new2linux
Replied by new2linux on topic Prototrak Plus Retrofit with Mesa 7i77 & 5i25 cards
MarkD2
So sorry for the slow response, this is inside the cabinet of 7i77 card and a pic of the position and color of wires going to plug to encoder looking from inside. I hope this helps.
Edit: The 7i77 card position 1 is the orange wire
position 2 is the Red wire
position 3 is the Gray wire
position 4 is the Green wire
position 5 is the Violet wire
position 6 is the Black wire
position 7 is the no wire
position 8 is the mo wire
So sorry for the slow response, this is inside the cabinet of 7i77 card and a pic of the position and color of wires going to plug to encoder looking from inside. I hope this helps.
Edit: The 7i77 card position 1 is the orange wire
position 2 is the Red wire
position 3 is the Gray wire
position 4 is the Green wire
position 5 is the Violet wire
position 6 is the Black wire
position 7 is the no wire
position 8 is the mo wire
Attachments:
Last edit: 27 Jan 2020 16:33 by new2linux.
The following user(s) said Thank You: MarkD2
Please Log in or Create an account to join the conversation.
27 Jan 2020 16:04 - 27 Jan 2020 16:05 #155927
by new2linux
Replied by new2linux on topic Prototrak Plus Retrofit with Mesa 7i77 & 5i25 cards
Try pic again.
Last edit: 27 Jan 2020 16:05 by new2linux. Reason: pic was too large of file.
Please Log in or Create an account to join the conversation.
Moderators: piasdom
- Hardware & Machines
- CNC Machines
- Milling Machines
- Prototrak Plus Retrofit with Mesa 7i77 & 5i25 cards
Time to create page: 0.097 seconds