Retrofitting a 1986 Maho MH400E

More
23 Jan 2021 01:22 #196302 by J Green
Mark
Thanks for the continued what's up of the Maho retrofit an usage.
Have been looking at some of Kent VanderVelden You Tube's stuff and thought you might be interested in his auto feed rate override ( collision control ) and his video about tool length probe error .
Bob
PS --- Big thank's to all the other contributors to this Maho thread
The following user(s) said Thank You: RotarySMP

Please Log in or Create an account to join the conversation.

More
24 Jan 2021 11:56 #196402 by RotarySMP
I spent this week trouble shooting the 7i84 (there is a separate thread). Turns out the 7i77 is damaged, but only one input TB8-15.

I got my pendant connected and mostly working, but do not understand the error in my HAL with respect to the jog increments. I described it in this video. I would appreciate any help with this.

Attachments:
The following user(s) said Thank You: arvidb, tommylight

Please Log in or Create an account to join the conversation.

More
24 Jan 2021 12:55 - 24 Jan 2021 13:00 #196405 by RotarySMP
LinuxCNC generated the Jog component and it's pins like jog-scale, jogincr.in01 etc, and yet I can't find anything about this module in the version 2.7 dokumentation, or with google search. I find use cases but no description of the actual module.
Mark
Last edit: 24 Jan 2021 13:00 by RotarySMP.

Please Log in or Create an account to join the conversation.

More
31 Jan 2021 11:03 #197215 by RotarySMP
Duh. Tht is becase it is not a comp. Turned out it is a Mux16 with a name assigned.

I did a fair bit more on the MAHO this week..

Mark
The following user(s) said Thank You: arvidb, tommylight, anfänger

Please Log in or Create an account to join the conversation.

More
07 Feb 2021 15:37 #197922 by RotarySMP
A little more Maho action this week.

Enjoy.
Mark
The following user(s) said Thank You: tommylight, anfänger, J Green

Please Log in or Create an account to join the conversation.

More
11 Feb 2021 08:26 #198367 by J Green
Mark
Big Thank's for your on going videos . Could we hope to see a video of Nick-O chained to the garage entrance untill he finishes the latest gear shifting "C" code update ! :evil:

Stay safe & warm
Bob

Please Log in or Create an account to join the conversation.

More
11 Feb 2021 08:56 #198369 by RotarySMP
Hi Bob,

Nico is not programmer. That is Sergey. I have no idea if Nico ever did any coding, but I am certainly not going to find out on the Maho :)

I need to get Nico over to finish his car jack hack before my new machine arrives Tuesday/wednesday next week. I need that crap out of my way.

I did nudge Sergey recently, but he is busy.
Mark
The following user(s) said Thank You: anfänger

Please Log in or Create an account to join the conversation.

More
11 Feb 2021 10:00 #198373 by anfänger
Looking forward to see the new machine of yours

Please Log in or Create an account to join the conversation.

More
11 Feb 2021 10:03 #198374 by RotarySMP
Me too. Due covid restrictions, I had to take a punt on this one, and bought it sight unseen, from another country. No risk no fun :)
Mark

Please Log in or Create an account to join the conversation.

More
11 Feb 2021 11:42 #198385 by anfänger
Did the same with the tailstock for my lathe and didn’t even pick it yet. Strange times.

Good Luck with it.

Patrick
The following user(s) said Thank You: RotarySMP

Please Log in or Create an account to join the conversation.

Moderators: piasdom
Time to create page: 0.209 seconds
Powered by Kunena Forum