Deckel Retrofit FP4A

MrSpeaky
Offline
Junior Member

19 Mar 2021 15:26 #202850 by MrSpeaky

Replied by MrSpeaky on topic Deckel Retrofit FP4A

Yes it is thank you. But i cant seem to find him habing found a proper solution to his gearbox

Please Log in or Create an account to join the conversation.

db1981
Offline
Platinum Member

19 Mar 2021 15:38 #202852 by db1981

Replied by db1981 on topic Deckel Retrofit FP4A

do you have more papers in the orange book as scanned into the pdf?
there should be an outprint/drawing of the pc programm. Then may be i can help you.
unfortunately in the orange book from the later dialog11 and tncs this is not included anymore.
When i'm finished with my gildemeister adventure, the deckel is the next on the list for linuxcnc. so it makes no matter for me if i code this now or next year...

Please Log in or Create an account to join the conversation.

MrSpeaky
Offline
Junior Member

19 Mar 2021 16:01 #202853 by MrSpeaky

Replied by MrSpeaky on topic Deckel Retrofit FP4A

Yes i do. I didnt scan it because i thought it was uneccesarry as i am replacing the old dialog with the mesa cards and all the dialog did was interfacing into the servo drives which i removed and the sps
will upload it in about 5 Hours

when i am home from the workshop

Please Log in or Create an account to join the conversation.

MrSpeaky
Offline
Junior Member

19 Mar 2021 16:19 #202854 by MrSpeaky

Replied by MrSpeaky on topic Deckel Retrofit FP4A

Servo Driver Manual for interested people
drive.google.com/file/d/1NzzHhSwe0MWmio7...hg/view?usp=drivesdk

Please Log in or Create an account to join the conversation.

Aciera
Offline
Administrator

19 Mar 2021 16:59 #202859 by Aciera

Replied by Aciera on topic Deckel Retrofit FP4A

But i noticed that they also support Fancy Modbus over ethernet cable might actually be easier to controll then through that cause you can just connect them together but i dont know how that works

As far as I know you would be the first to get that to work. This comes up every so often but Modbus is not not meant for coordinated movement. LinuxCNC can communicate through modbus but not inside the real time domain. Modbus can be useful for parametrization of the drives though and maybe to get status data from the drives to the PC i.e. current, torque, temperatures or whatever the drives firmware offers.

Please Log in or Create an account to join the conversation.

RotarySMP
Offline
Platinum Member

19 Mar 2021 17:21 #202862 by RotarySMP

Replied by RotarySMP on topic Deckel Retrofit FP4A

I was also wondering about MODBUS control of the Lichuan Servo draiver and got informed that this is not a real time capable interface...

forum.linuxcnc.org/26-turning/41498-scha...fit?start=120#201802
Mark

Please Log in or Create an account to join the conversation.

MrSpeaky
Offline
Junior Member

19 Mar 2021 18:28 #202873 by MrSpeaky

Replied by MrSpeaky on topic Deckel Retrofit FP4A

First the missing orange book pages for the conterol co tour 3 and dialog 4:
drive.google.com/file/d/1OG9K_LLbETz8TEi...pd/view?usp=drivesdk

PC Code documentation let me know if i missed a page

drive.google.com/file/d/1OBomj7KGKw3m_GT...-U/view?usp=drivesdk

Please Log in or Create an account to join the conversation.

db1981
Offline
Platinum Member

19 Mar 2021 18:59 #202879 by db1981

Replied by db1981 on topic Deckel Retrofit FP4A

Oh, this collection is fantastic. If you have the original papers and time for this, i would myself wish an better scan of the pages 19 and 20 from contour pdf. May be with this and a little time we can design our own 11uA Heidenhain scales interface. Instead of using old exe's.

Please Log in or Create an account to join the conversation.

MrSpeaky
Offline
Junior Member

19 Mar 2021 19:23 #202883 by MrSpeaky

Replied by MrSpeaky on topic Deckel Retrofit FP4A

I tried right now but its nearly impossible the original is nearly unreadable as its also only a copy made through the old telephone printer thingies (dont know the english term)

Please Log in or Create an account to join the conversation.

MrSpeaky
Offline
Junior Member

19 Mar 2021 19:48 #202886 by MrSpeaky

Replied by MrSpeaky on topic Deckel Retrofit FP4A

Documenting state of the electrical cabinet 19.03.2021

drive.google.com/drive/folders/16XWTY6ko...r1Ul0-rv?usp=sharing

gonna hook up the 24 Volt with the Mesa now and looking for the spindle break relay

Please Log in or Create an account to join the conversation.

Moderators: piasdom

Time to create page: 0.090 seconds