Axis Position Logger

More
2 years 7 months ago #296039 by partec
Replied by partec on topic Axis Position Logger
I'm constantly testing, it really hit me again, super exciting, thank you
The following user(s) said Thank You: Aciera

Please Log in or Create an account to join the conversation.

  • Aciera
  • Away
  • Administrator
  • Administrator
More
2 years 7 months ago #296043 by Aciera
Replied by Aciera on topic Axis Position Logger
Another small fix for the Log Comment section reappearing on startup.
The following user(s) said Thank You: partec

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago #296052 by partec
Replied by partec on topic Axis Position Logger
in axis MDI M129 starts emclog.py and setup works fine so far 
use emc-log with 'Manual Log' button seems fine already 

my Cam-align button starts MDI_COMMAND=o<log>call and motion.digital-in-00 works now in Halshow 

it would be fine to prepare now 'to start a single emc-log trig from this motion.digital-in-00' ?

Please Log in or Create an account to join the conversation.

  • Aciera
  • Away
  • Administrator
  • Administrator
More
2 years 7 months ago #296053 by Aciera
Replied by Aciera on topic Axis Position Logger

it would be fine to prepare now 'to start a single emc-log trig from this motion.digital-in-00' ?

Should work. You will need to set up the digital-in LogTrigger in the Gui:

 
The following user(s) said Thank You: partec

Please Log in or Create an account to join the conversation.

More
2 years 7 months ago #296056 by partec
Replied by partec on topic Axis Position Logger
but sure, of course flawless, thank you very much!

Would you possibly have free capacity for the commercial development of a special control?
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

  • Aciera
  • Away
  • Administrator
  • Administrator
More
2 years 7 months ago #296064 by Aciera
Replied by Aciera on topic Axis Position Logger

Would you possibly have free capacity for the commercial development of a special control?

Your question honors me but I'm not a programmer and I only do this on the side. 
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Time to create page: 0.486 seconds
Powered by Kunena Forum