Pimping the mini-lathe

More
11 Aug 2020 19:33 #177931 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
Regarding using e as EXP [n] or EXP(n)

I tried to set the spindle value with
S EXP[n]
S [exp[n]]
S [EXP(n)]


but all combinations return "unknown bracket missing after unary operation

Please Log in or Create an account to join the conversation.

More
11 Aug 2020 19:43 #177933 by tommylight
Replied by tommylight on topic Pimping the mini-lathe
Regarding spindle, have a read through this, some nice pointers there:
forum.linuxcnc.org/38-general-linuxcnc-q...-0-10v-analog#177085

Please Log in or Create an account to join the conversation.

More
11 Aug 2020 19:44 #177934 by PCW
Replied by PCW on topic Pimping the mini-lathe
Typo:

net spindle-ccw <= spindle.0.reverse
net spindle-cww => hm2_7i96.0.ssr.00.out-02

The following user(s) said Thank You: RotarySMP

Please Log in or Create an account to join the conversation.

More
11 Aug 2020 19:56 #177936 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
I'm the worst coder. and an even worse proof reader. Thanks for spotting that PCW.

Thanks for the link Tommy, I'll check that out.
Mark
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
11 Aug 2020 20:20 #177940 by tommylight
Replied by tommylight on topic Pimping the mini-lathe
Last video was very nice, thank you.
The following user(s) said Thank You: RotarySMP

Please Log in or Create an account to join the conversation.

More
16 Aug 2020 10:26 #178378 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
Episode 27 is up...


Enjoy.
Mark

Please Log in or Create an account to join the conversation.

More
16 Aug 2020 11:15 #178385 by tommylight
Replied by tommylight on topic Pimping the mini-lathe
PI = 3.24658 WTH???? :)
PI here = 3.1415
PI in Australia = 3.24658
3.24658-3.1415 = difference in time zone between here and Australia ! :)
Very nice video, thank you.

Please Log in or Create an account to join the conversation.

More
16 Aug 2020 11:23 - 16 Aug 2020 13:26 #178387 by RotarySMP
Replied by RotarySMP on topic Pimping the mini-lathe
Your Pi is fake news. Everyone gets to define their own reality. But I do agree with your opinion of Australians :). Dont tell Rod.
Thanks for watching :)
Mark
Last edit: 16 Aug 2020 13:26 by RotarySMP.
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
16 Aug 2020 11:35 #178392 by tommylight
Replied by tommylight on topic Pimping the mini-lathe
LOL, shhh hiding from Rod.... :)

Please Log in or Create an account to join the conversation.

More
16 Aug 2020 12:43 #178401 by machinedude
Replied by machinedude on topic Pimping the mini-lathe
it's bad enough working between imperial and metric as it is :) following that video made my head hurt :) 30 years of machining and I have never came across anything other than imperial and metric dimensions :) you are the master of measurements across the globe it seems :)
The following user(s) said Thank You: RotarySMP, thefabricator03

Please Log in or Create an account to join the conversation.

Moderators: piasdom
Time to create page: 0.149 seconds
Powered by Kunena Forum