Forum Menu

1982 Matsuura MC-500v Retrofit

More
9 years 9 months ago - 9 years 8 months ago #85888 by chopper79
Replied by chopper79 on topic 1982 Matsuura MC-500v Retrofit
Edited: See post # for all the documentation I have. Manuals, wiring , etc.
Last edit: 9 years 8 months ago by chopper79.

Please Log in or Create an account to join the conversation.

More
9 years 9 months ago #85908 by tommylight
Replied by tommylight on topic 1982 Matsuura MC-500v Retrofit
Am on the phone now, will check later.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
9 years 9 months ago #85927 by tommylight
Replied by tommylight on topic 1982 Matsuura MC-500v Retrofit
Got this in a hurry.
enable goes to drive enable on 7i77 and analog goes to analogout on 7i77, mind the polarity.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc
The following user(s) said Thank You: chopper79

Please Log in or Create an account to join the conversation.

More
9 years 9 months ago #85928 by chopper79
Replied by chopper79 on topic 1982 Matsuura MC-500v Retrofit
That's what I was thinking..... Now to find them in the db9 connector.

Thanks

Please Log in or Create an account to join the conversation.

More
9 years 9 months ago #85941 by chopper79
Replied by chopper79 on topic 1982 Matsuura MC-500v Retrofit
Well I found those wires, but I can not get the drive to enable. There has to be some more wires that need hooked up. I noticed on Skunkworks build he has an ena+ and ena- hooked up on his mesa board.

Please Log in or Create an account to join the conversation.

More
9 years 9 months ago #85943 by PCW
Replied by PCW on topic 1982 Matsuura MC-500v Retrofit
You always need to use the 7I77s ENA+ and ENA- together
since they are two connections to a switch

Please Log in or Create an account to join the conversation.

Time to create page: 0.217 seconds
Powered by Kunena Forum