Biesse Rover 18 CNC router

More
28 Jan 2024 23:52 #291853 by tommylight

tommy, you are next to me, i'm from romania
tell me a price and i will pay for retrofit my biesse 322 and training

Sorry but i am not able to travel for now.
The price is usually from 3500-7000 Euro for labor only plus expenses, the 322 would be probably 5000-6000, add to that the boards and other required equipment should run probably under 2000 Euro. Again usually, takes me about 10-20 days, but i do not sit nor pause for 14-16 hours/day. And yes, i eat and drink coffee standing and working! :)
-
Start a new topic, find someone who knows a bit of electronics, you will get all the help you need here on the forum for free.
Take it in sections, make it move axis, make the E-stop and enable work properly, then one of the spindles, make the vacuum and dust collection work, and later the other spindle and side drills.

Please Log in or Create an account to join the conversation.

More
13 Feb 2024 08:18 - 13 Feb 2024 08:54 #293203 by Gizmo
Replied by Gizmo on topic Biesse Rover 18 CNC router
Hello @Peterdeleu,
I try do do my own retrofit of Rover 18, but unfortunately there is no
circuit diagram. If You still have schematics, could You share?
Regards
 
Last edit: 13 Feb 2024 08:54 by Gizmo.

Please Log in or Create an account to join the conversation.

More
16 Feb 2024 19:12 #293536 by imperial
Replied by imperial on topic Biesse Rover 18 CNC router
thanks.
i'll follow the next way: just buy the 3 ethercat drivers , all system will be based on this protocol; a friend of mine will set for moving....and the remaining will try to do in in future, i don't now how

Please Log in or Create an account to join the conversation.

More
19 Feb 2024 23:15 #293807 by BaBaroka
Replied by BaBaroka on topic Biesse Rover 18 CNC router
pershendetje nje email apo nr kontaktues

Please Log in or Create an account to join the conversation.

More
20 Feb 2024 01:49 #293813 by tommylight

Please Log in or Create an account to join the conversation.

Moderators: cncbasher
Time to create page: 0.088 seconds
Powered by Kunena Forum