Multiple tools on the CNC

06 May 2019 15:40 #132973 by pl7i92

Replied by pl7i92 on topic Multiple tools on the CNC

peter you mostly can even BY dip switch drives to 0-10V
wher 5 is the Zero run 4.95 5.15 logeritmic scale

Please Log in or Create an account to join the conversation.

09 May 2019 21:14 #133297 by Peterdeleu

Replied by Peterdeleu on topic Multiple tools on the CNC

Does this mean that you can simply switch the polarization to let the servo motors run in revers?

Please Log in or Create an account to join the conversation.

Time to create page: 0.066 seconds