Forum Menu

New Project with Mesa 7I96 and THCAD-05

More
5 years 4 months ago #210965 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
I was t suppose to remove my existing linuxcnc right? Now I need to start all over again?

Please Log in or Create an account to join the conversation.

More
5 years 4 months ago #210966 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
Just uninstall it then install it exactly like on the Buildbot page. It does not affect any configs.

Please Log in or Create an account to join the conversation.

More
5 years 4 months ago - 5 years 4 months ago #210967 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05
Ok I went to open the GUI now gives me a error on file ./plasmac.tcl
Pin halui.spindle.0.stop was already linked to signal spindle-manual -stop
Last edit: 5 years 4 months ago by TexasCNC.

Please Log in or Create an account to join the conversation.

More
5 years 4 months ago #210968 by phillc54
Replied by phillc54 on topic New Project with Mesa 7I96 and THCAD-05
Did it tell you plasmac was update and you need to restart linuxccnc?

If yes the run linuxcnc again, if not can you post the machine hal file and the connections hal file.

Please Log in or Create an account to join the conversation.

More
5 years 4 months ago #210970 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05

phillc54 wrote: Did it tell you plasmac was update and you need to restart linuxccnc?
No it didn’t tell me to
If yes the run linuxcnc again, if not can you post the machine hal file and the connections hal file.

Let me see if I can copy them over

Please Log in or Create an account to join the conversation.

More
5 years 4 months ago #210971 by TexasCNC
Replied by TexasCNC on topic New Project with Mesa 7I96 and THCAD-05

File Attachment:

File Name: lastcnc_co...ions.hal
File Size:1.67 KB

File Attachment:

File Name: lastcnc.hal
File Size:10.27 KB

Please Log in or Create an account to join the conversation.

Time to create page: 0.506 seconds
Powered by Kunena Forum