Work with probe

It's been a long time since I looked at this code (or used it for that matter). I'm not familiar with gnoccapy, so I don't think I can help you.

Sorry about that.

Ken

Thinking about it some more...

1 -- Do you have a working probe? If not, get your probe working first.

fairngs:
have you a working probe connected to Probe-in in your Hal config
what exactly are you having problems with ?

message me and i'll try and guide you through any setup

I was having trouble with accessing the subroutines in the single probe file. I have not had time to try it further but I think that problem was due to not putting .ngc on the end of the symlink names.

fairngs wrote: I was having trouble with accessing the subroutines in the single probe file. I have not had time to try it further but I think that problem was due to not putting .ngc on the end of the symlink names.

Сheck just in case that all files from the archive from folder "macros" are placed in folder specified in your ini file as SUBROUTINE_PATH.

Yes -- the symlinks must end with .ngc.

Ken

[strike]Just to clarify: Are the files right at the beginning the latest version, or are there updated versions scattered through the thread?[/strike]

I now see that there is a link to the files.