Work with probe

you might want to look at rapid speed =60, don't know if you simply changed that for testing but its a bit slow..

cheers, john

has ANYONE got this probe_screen to work with master?
if yes, how the heck? could 'ya share the way?
thanks

I have same problem - must be in mdi mode... I have no idea why it stopped working. Surely we are not the only two people in the world trying to use it with the latest linuxcnc version?

cheers!

Hmm I'll have to check mine, I've only just installed it off a live CD about a month back.

Mech john wrote: Hi CSBrady,
I was using the probe screen and all was working fine. I upgraded to master a couple of days ago and now it does not work fine. I have this strange ´must be in mdi mode´ issue. I looked at your patch but did not install it so far as reading your posts it seemed you could not get to the bottom of it... Any suggestions? How did you solve this problem?

I was able to solve the problem with the patch I posted and everything is working fine for me. What I was never able to figure out is why nobody else seemed to be running into the same problem. I suggest trying the patch and see if it works for you also.

Chris

You can find my ini file and the rest of my configuration stuff at:

www.se-ltd.com/~lerman/files/by_interface.pico.KLunivpwmv/

It's not very neat (actually, it's a mess), but consider it (like all of life) a work in progress.

Ken