Work with probe

Before anybody puts some effort in this, let me first doublecheck something and I will come back.
Regards
Albert

Since its a "work with probe" topic, I thought it might be helpful for some of you guys to watch my review on a sensor that I've bought. Enjoy!

Hi,
I thought I saw the issue, but it wasn't. So I still need to do the unlinkp, although I can't see where they get linked, but anyway it is working and I will close my topic.

Installed vers.by/ probe
Installed Vers Probe sceen on Linuxmint 19.3 "Mate" + Linuxcnc 2.8

First impression / Errors / Bugs / Improvement:

-When starting any touch cycle hiting "ESC"/"F1" keys don't stop the cycle....
-Think it will be better having edge lenght for X and edge lenght for Y so it can center a external rectangle

tecno wrote: [code]**** probe_screen GETINIINFO ****
Preference file path: gmoccapy_preferences
**** PROBE SCREEN INFO ****
**** To many increments given in INI File for this screen ****
**** Only the first 5 will be reachable through this screen ****
/code]

What was your solution to correct the above problem.

Thanks.

Five increments limit because it no longer fits the screen.
Configured in .ini file:

[DISPLAY]
...
# list of selectable jog increments
INCREMENTS = 1, 0.1, 0.01, 0.001