Debian 12 - Bookworm Live installer ISO for linuxcnc (x86_64)

Thanks for that. I did edit it a bit too.
Anything Debian 12 will install on should be supported so there should be no restrictions.
2 Core PC's can be a bit slow but with my 6.3 kernel and a R8168-dkms driver, guys have got it going...
I would recommend 4 core and above.

One project I am thinking about is to build a Rapberry Pi image using a cross compiler on X86.
The old Linuxcnc buildbot uses a raspberry Pi to build on which is  a bit problematic in terms of reliability.

Ethercat still 32bit ?

The first post has been updated to include a repository for the linuxcnc-ethercat hal driver.
This was due to generous help from Bjarne Van Horn from IgH. IgH wrote the ethercat master we use
From there, I was able to build a Deb file of the Ethercat driver and host it on a repository.
If you don't want to use the installer bove, you can build the Deb or use the repository as described in the readme on my github here:
github.com/rodw-au/linuxcnc-ethercat/tree/adapt_debian
I can't believe how easy it was to host the package at cloudpackage.io

Hi, MR.Rodw
I D/L image from your link I try install
Debian 12 start up and I use
sudo apt update
sudo apt upgrade
it's have some WARNNING how can I fix ?

and below in picture , icon not show picture of shortcut program too.

 

abdulasis12 wrote:

... and below in picture , icon not show picture of shortcut program too....

 

Network appear to be disconnected (top right of the picture), thus cannot reach any server for updates.

JPL wrote:

Network appear to be disconnected (top right of the picture), thus cannot reach any server for updates.

Hi mr. JPL
My PC have 2 network
- Pcie wifi card
- Pcie LAN network card
I'm not sure that icon show because wifi not connect but lan connect internet.
I will check again tomorow , will reply soon.
Thank you.image missing /media/kunena/emoticons/smile.png

Asis,