Debian 12 - Bookworm Live installer ISO for linuxcnc (x86_64)

The download in the first post has now ben updated as a fork of the Official Linuxcnc live installer DVD.
Please reread the first post as its changed.
I have sent a pull request to linuxcnc
github.com/LinuxCNC/linuxcnc-live-build/pull/27

After installation, to get the latest 2.9 version of linuxcn just type
Mods might like to sticky this. 
 

This now has ethercat and qtpyvcp/probebasic repositories on it.
Moving to the Linuxcnc live installer took the image out to 3 GB so I won't be adding any CAD stuff.
For some reason the non-free-firmware setting is not being respected so you might need to add it back in to /etc/apt/sources.list

Please review the original post as it has changed significantly as it is now complete.
I have sent a pull request to the Linucnc Live Installer  as its now complete.

Note that we have just done the installer. issues with QTPYVCP or ethercat are out of scope of this thread. We just set up the repositories. If something is not working with additional software you install is nothing to do with installing linuxcnc.

Tommy, Could you sticky this as it is a great timesaver for anybody wanting to use Bookworm, probe-basic or ethercat.

The first post requires a bit of editing, command lines are attached to other stuff.

tommylight wrote:

The first post requires a bit of editing, command lines are attached to other stuff.

try that! (You can do the next edit on our glorious forum) image missing /media/kunena/emoticons/silly.png

Modified the tittle to reflect it is for x86 only.
This should work on all PC'c, even older ones, did you check about memory addressing? Can it do more than 4GB? Does it have/require PAE options?