Debian 12 - Bookworm Live installer ISO for linuxcnc (x86_64)

You do not have internet.
What PC and  What network card in your PC.
There was a regression where non-free non-free-firmware

Was not added to /etc/apt/sources.list

Please: sudo geany /etc/apt/sources.list
and add those words in bold to every line that starts with deb, then updada and upgrade
Its possible that you do not have NIC support which is strange.

Hi,
Today I connect WIFI and go update again
sudo apt update
sudo apt upgrade
Maybe today for update time. image missing /media/kunena/emoticons/laughing.png

 

Perect! you should now have a fully configured system with the latest verion of linuxcnc which you will find under the cnc folder. If the docs are ot the latest, that is not a big deal. They are huge debs

rodw wrote:

You do not have internet.
What PC and  What network card in your PC.
There was a regression where non-free non-free-firmware

Was not added to /etc/apt/sources.list

Please: sudo geany /etc/apt/sources.list
and add those words in bold to every line that starts with deb, then updada and upgrade
Its possible that you do not have NIC support which is strange.

Hi, MR.Rodw
I add all done.
Now after sudo apt update show Hit...........Inrelease  (total 6 hit)
show Get ....... InRelease  (1)
I type
sudo apt upgrade  show 0 upgradeed 0 install
any more for action ?
 

That is probably right. The install would have grabbed the lastest version of Debian 12.1. There has been some security updates by Debian but I think they were before I made the installer so there will be no new items from Debian. No errors for the Linuxcnc repo so maybe nothing has been built for a few days.

Debian is fixed for its life after a minor 12.1 bug upgrade. so only Linuxcnc will change with the exception of the occasional security update patching any vulnerabilities.

Very cool!

I had downloaded the ISO file from the first post last week, and got to installing it today. couple minor issues;
when the installer get to the  "configure APT" section, I get an error that it can not access a Mirror (I did a screenshot but cant open the file?)Retried several times with no luck. It gives an option to enter a new Mirror, but that is way out of my paygrade.
I ignore that error and it completes everything else.

I then tried to install python and probe basic per the instructions in the first post, but get this; 

I assume this would be the mirror issue from above?

if i do sudo apt update i get another warning  that some repositories changed. I can accept the changes and it does something, but again...way above my paygrade; 


and finally sudo apt upgrade seems to upgrade to the latest linuxcnc? 
 

I guess I can get python and probe basic by doing it manually, but dont know if there are any other broken packages.
It is entirely possible I screwed up something since I am more machinist than linux geek though.