EtherCat I/O

Hello.
Thank you very much for your answer, it gives hope.
Please help me figure out how to use the Beckhoff EL3068 module. I install this module but the system does not know this type and fails. Please show in detail, step by step, how I can make this module work in LinuxCNC.
I specifically made a separate topic - forum.linuxcnc.org/ethercat/49902-unsupported-beckhoff-module for this, because I think this example will be very useful to many people.
Thank you very much for your understanding.

jjdege wrote:

Hi everyone
i would like to report this I/O device, LINK WAS HERE 
it has everything needed for a CNC machine and XML file configured for LCNC, I have it and it works.
bye thank you

This post has been reported as spam, but it is related to our subjects/topics, so leaving it for now.
-
The price is 179E or a bit over $200, and that seems way to much for what it can do.

@Sakhalin_Cat
No double posting .

Hello ChapEng,
I wanted to ask if you have the Datasheet and the fitting Software for the Diewu IO would be nice to have it and look over it before I buy it.
Best,
Smitherman

Its a vey basic device with 16 inputs and outputs. The XML ChapEng shared is all you need.

Thank you for your reply, I am not planning to use that XML file, because I am planning to Connect it otherwise, but my main question is regarding to the I/O ports. So if they are only usable as a sort of relay port, or if I can set them up to maybe drive even a stepper in the future or to track some analog signals comming in.
Best regards,
Smitherman