Advanced Search

I came across this Linux based all in one cnc controller, and it's cheap. I wonder what's under the hood software wise,  anyone seen it yet ? 

www.aliexpress.us/item/3256809291737025....pt=glo2usa4itemAdapt

If G43 is active, G0G53Z0 , the dro shows toollength. If cancel tool G49, same position is Z0

Prepare for epic happiness.
It's a plasma system so many things are not needed/wanted in for example a milling machine.
The E7000 is my own ethercat torch height/io board, I'm rather confident you don't have that one. 

 
 

IN MDI I CAN PUT GOG53X0Y0  AND IT GOES TO MACHINE REF. FOR THESE AXES . BUT GOG53ZO WILL NOT RETURN TO Z REF. POSITION. CHANGES EVERYTIME I DRY RUN A PROGRAM. BUT WHEN I HIT THE REF. BUTTON, IT WILL GO TO Z REF.  CONFUSSED, PLEASE HELP.

automata wrote:

I have not gotten the tormach V2.12 version of linuxcnc to compile.

Seems to be the consensus.

I have one Tormachs earlier versions (V2.10) to compile on Debian Stretch.

Do you have steps to make this work that you are willing to share?

Do you think this would compile on Bookworm?

I have v2.9 of Linuxcnc compiled and running on Debian Bookworm.

Do you have steps to make this work that you are willing to share?

3.This version also does not differentiate between Joints and axes as Tormach has forked linuxcnc before the joints-axis patches were finalized.

Yea, that seems to be a lot of the complication with incorporating their 9 axis look ahead into our code base.

I am looking to first make a guide of sorts of re-producible steps to compile 2.10 (and 2.9 if they are vastly different, and then I would like to look at what is missing/divergent to get 2.12 to compile. From there, I would like to ask Tormach for the missing pieces (if any) and go from there.

I have altered the parallel port tester to test the DB25 "parallel" port of my mesa 6i25 which is used with a cheap "China BOB Mach3".
   
 

Was passiert wen nur die LinuxCNC neustartet?

Thanks for the replies. I guess updating Linux and LinuxCNC is the only option left. The machine is at an other location, I will try installing the updates when I'm there again.

I made some changes to the gmoccapy interface, added some custom buttons using the Glade editor if I remember correctly. Will these modifications be overwritten when I do the updates?

andypugh wrote:

ihavenofish wrote:

This is still not the build with the jerk limiting right?

 
Does PathPilot have jerk limiting? Or are you talking about the Grotius version? 

I may have muddied the waters a bit, when I talked of the different versions, I thought maybe we were talking about their addition of “high speed machining” and possibly over generalizing it as Jerk Limiting.

Hallo Ich habe immer noch ein Problem mit der LED CR6 (ini)
Wenn ich ein Programm in Linuxcnc starte und ein Fehler beim Start auftritt
Leuchtet die CR6 LED Rot.
Wie kann ich die LED wieder auf normal schalten oder muss ich jedes Mal die Steuerung Neu Starten.

Rechner Linuxcnc 2.9.4
Mesa 7i96s
Mesaflash 7i96s_7i85

Dear Hakan, thank you for your reply.
Could you please give me hal and ini?
If you could, I would be the happiest person in the world.

 
It should have said you can not control. Sorry.

if Mesa or ethercat,  disable energy efficient Ethernet with commands for your NIC (Intel/Realtek) and consider adjusting IRQ for the network card to prefer the core the servo thread is running one. There is a script somewhere on the forum here.

andypugh wrote:

I really thought we had a newer version than that on Bookworm, but the package lists suggest otherwise. 

[/quote]
You do. Looks like the OP is using the version included in bookworm and has not used the 2.94 ISO
But that's not an issue. Just follow the instructions in the 2.94 docs under getting Linxucnc, section 7.

But also Debian Trixie should be released in the next couple of days. Once that happens an early adopter can do a
sudo apt dist-upgrade
should install Trixie and upgrade to 2.9.4

Its quite possible to get linuxcnc and Ethercat working with secure boot. The instructions you followed have a spoiler to open  explaining how to do it. The method came from the ethercat guys and I have tested it as working.