Advanced Search

Outlook sucks.

It lets all the spam through; puts sends good emails to junk.

Really same person?

Wasting our precious DigitalOcean resources.

Hello, This is likely the wrong spot to ask this question, but as its one of the first things I've machined using linuxcnc on the machine...

The profile I've machined is essentially circular and should be symmetrical, and the bore clocks in at X0,Y0.
issuing a G0 X0, Y0 gets me back over the bore and it repeatably clocks in.
The finished machined part has a Y offset of 0.2mm.
This may be a programming issue, but I have noticed a random Y -28.11 offset in the tool table for the tool used.
If that entry was doing what I thought it should, then the mis-machining would have been 28.11 and not 0.2. However, could this entry have caused the issue?
On a three axis mill, is there a purpose for the X and Y offsets in the table?
Thanks

Hallo liebe Gemeinde
Der Nörgler ist wieder mit einen Problem da. Ich möchte den Werkzeug Längen Tester Innstallieren. Habe mir das Video von Talla83 angeschaut, dieser hat aber eine andere Mesa Karte gehabt. Kann man das auch für die Mesa 7i96s nehmen? das nächste wird noch da Handrad aber das muss ich erst besorgen (möchte es Kabellos machen daher ein China Produkt). Habe Peter (Talla83) angeschrieben aber keine Antwort bekommen.
Gruß und nochmal ein Danke für eure Hilfe.
Hans

3 BLDC on one TangNano9k
youtube.com/shorts/vBrvq76CJBk

This Benezan config looks correct:

 

Benezan breakouts have step/dir swapped but this version has
the ability to swap the default step/dir pins with a hal parameter

Yes - I hit power and lcnc thinks it is moving. The servo stays in PreOp. 
My mistake - the changed files were not copied into the folders. 
Now I have success - I have errors 
twopass:pass0: loadusr -W lcec_conf ethercat-conf.xml

twopass: load_the_modules cmd=<orig_loadrt motmod servo_period_nsec=1000000 num_joints=3 base_period_nsec=100000 servo_period_nsec=1000000 num_joints=3 unlock_joints_mask=16 num_dio=6 num_aio=3>
waitpid failed /usr/bin/rtapi_app motmod
/usr/bin/rtapi_app exited without becoming ready
insmod for motmod failed, returned -1


twopass: load_the_modules cmd=<orig_loadrt lcec>
waitpid failed /usr/bin/rtapi_app lcec
/usr/bin/rtapi_app exited without becoming ready
insmod for lcec failed, returned -1

Shutting down and cleaning up LinuxCNC...
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments

Debug file information:
Note: Using POSIX realtime
cia402_homecomp: dlopen: /usr/lib/linuxcnc/modules/cia402_homecomp.so: cannot open shared object file: No such file or directory
<commandline>:0: waitpid failed /usr/bin/rtapi_app cia402_homecomp
<commandline>:0: /usr/bin/rtapi_app exited without becoming ready
<commandline>:0: insmod for cia402_homecomp failed, returned -1
motmod: dlopen: /usr/lib/linuxcnc/modules/motmod.so: undefined symbol: update_joint_homing_params
LinuxCNC Ethercat crashed with signal 11
-- STACK TRACE START
0    /usr/lib/linuxcnc/modules/lcec.so(+0xfc8c) [0x7feb9d9b0c8c]
1    /lib/x86_64-linux-gnu/libc.so.6(+0x3c050) [0x7feb9e68a050]
2    /lib/x86_64-linux-gnu/libethercat.so.1(ecrt_slave_config_pdos+0x2f) [0x7feb9d97452f]
3    /usr/lib/linuxcnc/modules/lcec.so(rtapi_app_main+0x40a) [0x7feb9d9b1f38]
4    /usr/bin/rtapi_app(+0x10cd7) [0x55e898f48cd7]
5    /usr/bin/rtapi_app(+0x1162e) [0x55e898f4962e]
6    /usr/bin/rtapi_app(+0x11c2c) [0x55e898f49c2c]
7    /usr/bin/rtapi_app(+0xc974) [0x55e898f44974]
8    /usr/bin/rtapi_app(main+0x70f) [0x55e898f4444f]
9    /lib/x86_64-linux-gnu/libc.so.6(+0x2724a) [0x7feb9e67524a]
10    /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85) [0x7feb9e675305]
11    /usr/bin/rtapi_app(_start+0x21) [0x55e898f44861]
-- STACK TRACE END
Waiting for component 'cia402' to become ready........Waited 3 seconds for master.  giving up.
Note: Using POSIX realtime

6457
Stopping realtime threads
Unloading hal components
Note: Using POSIX realtime
lcec: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX realtime
trivkins: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
Note: Using POSIX realtime
tpmod: not loaded
<commandline>:0: exit value: 255
<commandline>:0: rmmod failed, returned -1
<commandline>:0: unloadrt failed
Note: Using POSIX realtime

Mmmhh - in my understanding just the cia402_homecomp.so is missing - could this be right?

Moved to "off topic...."
-
Those are scams as pretty much if someone gets a hold of your crypto wallet and move assets to another wallet, even god can not get those assets back.
The same guy posted the Puma thing, most probably malware when clicking on the link, basically if you click on it, your PC is not yours anymore as they have full control and all the info within. Yes, even credit card info if you ever ordered something online.
Puma were quite good at one point in time ... long ago.
-
In general:
-never click on links, ever
-never click on e-mails, ever
-never open any websites, except what you know for sure is OK
With e-mails it is very easy, if someone you know or work with sends you an e-mail, ALWAYS call them to confirm it is from them, otherwise delete WITHOUT opening. This is extremely valid for whoever uses Outlook or any Microsoft stuff/windows/office.
Etc, etc.
-
Edit:
Same person posted about online casinos just now
Always from the same provider in UK through a VPN or Proxy in Florida, USA.

Just report it and we will delete it, one of us usually notices it but it’s not always easy when it’s posted on existing topics. I for one do not read every post.

Hmmm.... so linuxcnc starts with no error, you hit power on (F2?) and servo doesn't come to life? does linuxcnc think its moving when jogging?

Might be cool to make a switch circuit for homing with potentiometers tho, just sayin'.

Some guy posts a rant about how another guy stole his bitcoin or something.
He then re-posts it 3 times!!!


And why is a guy posting stuff about how PUMA athleticswear is a good investment.
First of all, it is not.
Second of all, PUMA kinda sucks.

And most importantly, it has literally nothing to do with anything even remotely CNC-related.

PWM going into an analog converter indeed

Current config is like this

net spindle-cmd-rpm => pwmgen.0.value
net spindle-on <= spindle.0.on => pwmgen.0.enable
net spindle-pwm <= pwmgen.0.pwm
setp pwmgen.0.pwm-freq 2000.0
setp pwmgen.0.scale 22800.0
setp pwmgen.0.offset -0.0710526315789
setp pwmgen.0.dither-pwm true
net spindle-cmd-rpm     <= spindle.0.speed-out
net spindle-cmd-rpm-abs <= spindle.0.speed-out-abs
net spindle-cmd-rps     <= spindle.0.speed-out-rps
net spindle-cmd-rps-abs <= spindle.0.speed-out-rps-abs
net spindle-at-speed    => spindle.0.at-speed
net spindle-cw <= spindle.0.forward

I went the same way but without success. I combined my working files (Beckhoff modules are working as they should) with the ones from MobiusToast. No error on startup but unfortunately no possibility to jog the axis as well. forum.linuxcnc.org/ethercat/54965-steppe...ervo?start=40#329744

After having a functional setup for my Beckhoff modules I tried to combine my files withe the ones from MobiusToast to tryout the settings for one of my servos. He mentioned that the files are working for him an that the one axis would at least be moveable. 
Surprisingly I have no errors when starting but the servo stays in PreOP and the axis or the motor is doing nothing when jogging the axis.
What could be missing or what could be my mistake(s)?