Advanced Search

Yes, that looks correct.

Maybe try a 'toggle' component:
linuxcnc.org/docs/devel/html/man/man9/toggle.9.html

If you want an M5 gcode to shut your spindle off you would probably want to use an internal motion pin like 'spindle.0.on' and invert that.

linuxcnc.org/docs/html/man/man9/motion.9.html

Actually, looking at this more closely, it's probably specific to dmitrys Mechatrolink hardware as 'nyx' refers to his hardware driver:

Looks like you have an EtherCAT setup so my input is not really relevant after all.

[edit]
I would expect that you need set the gear ratio in the motor drives.

My present HAL spindle start, stop logic is working as desired except M05 commands in my gcode files are ignored.

I can change the OR gate to a 4 input (personality 0x204), however I'm not sure what signal I would use to drive that 4th input, or if there is an overall more elegant solution for spindle control. Note: I always manually start the spindle before hitting the run button for gcode execution, so I don't really need G03, G04 capability.

Suggestions please.
   

Hello Aciera,
Can you share your note here ?.
I searched in DH-parameters for Genserkins and Vismach/Melfa-sim, could not find your note or anything mentioned about absolute encoder
Thank you.

jjdege wrote:

hi
here is the report with uname -v

 

no RT, yet it works, something went wrong

which kernel is working?

If you want instructions to create a PREEMPT_RT for Raspberry Pi 5 with native Raspberry OS you can see at this link

forum.linuxcnc.org/9-installing-linuxcnc...pi-5?start=40#303696

or use the ready-made image you find here

forum.linuxcnc.org/9-installing-linuxcnc...pi-5?start=40#303752

Then follow the procedures already described for Ethercat drivers

I think I got it

It is working now but it does not stay on (pin 17)

when I click on the soft button, and then release the mouse button , pin 17 goes back to the original state

so How can I make it permenent state change?

Thanks

I have imaginary 3-axis machine configured using stepconf wizard


I programmed the soft button

 <button>
     <halpin>"bob-Pin-17"</halpin>
     <text>"turn Pin-17 on"</text> 
     <font>;('Fixed',8)</font>
 </button>  

I want this button to set the output to the break out board pin 17 to true

I suppose this is the net statement goes to custom_postgui.hal file

 net pin-17-on  <= pyvcp.bob-Pin-17
net pin-17-on  is the signal name

then if the above is correct, where do I connect the signal defined above to the  physical pin 17

shall I write for example something like 
net pin-17-on =>  parport.0.pin-17-out 

if true, I think it goes to custom.hal

Many thanks

Good day

Philip

Awesome. Thanks for that extra work and for doing that, appreciated. 

I'll fork this weekend. You're the best!

hi
here is the report with uname -v

 

no RT, yet it works, something went wrong

which kernel is working?

I found some documentation, I think I have to convert the S32 to float, set a 10.0 float variable and then devide it.

i have finally moved the pll generators into the individual toolchain plugins, so that all toolchain-relevant parts are in the plugins.

this also makes it easier for you to remove everything that does not belong to gowin, you just have to remove all directories except thed gowin from riocore/generator/toolchains/.

Hallo ,

ich möchte einige meiner fehlerhaften topics löschen.

Danke

karlhe

Hallo,neuer Versuch...Linuxcnc neu installiert. easyprobe in meine maschine übertragen.Leider nicht erfolgreich-Danke für eure Hilfe.Karlhe