RS485 For Hypertherms

Good deal, thanks again!

phillc54 wrote: These extracts seem to show that pin 1 should be at the top, maybe Stefan will see this after he finishes his cool part tumbler and will chime in.

Warning: Spoiler!

I find this interesting. I am away from work for a few days so when I get back I will pull out the RS485 wiring on the machine and see how its mapped.

Ok I have Finally checked my machine, and the wires match the diagram.

Does that mean pin 1 is at the top here: linuxcnc.org/docs/2.8/html/plasma/plasma...ml#rs485_connections

Yes it does, I must of stuffed up my wiring but I dont know how it still works. Maybe that is why the USB to RS485 connector did not work.

I have amended the reference document.

thefabricator03 wrote: Yes it does, I must of stuffed up my wiring but I dont know how it still works. Maybe that is why the USB to RS485 connector did not work.

I have amended the reference document.

Thanks Stefan, I have pushed it to Git.