Hypersensing questions

rodw
Offline
Platinum Member

6 years 6 months ago #165284 by rodw

Replied by rodw on topic Hypersensing questions

Uthayne wrote:
Is that all I need to do to be current with your setup? comp attached

I'll vary N and report back.

I'll share the version I am using later today as I think I made some changes. That will be a few hours from now. Its obscenely early here)

Please Log in or Create an account to join the conversation.

tommylight
Offline
Moderator

6 years 6 months ago #165285 by tommylight

Replied by tommylight on topic Hypersensing questions

rodw wrote: That will be a few hours from now. Its obscenely early here)

I was just wondering about that, is it to early or to late, but now i know. Was it 10 or 11 hours difference ?

Please Log in or Create an account to join the conversation.

rodw
Offline
Platinum Member

6 years 6 months ago #165287 by rodw

Replied by rodw on topic Hypersensing questions

tommylight wrote:
rodw wrote: That will be a few hours from now. Its obscenely early here)
I was just wondering about that, is it to early or to late, but now i know. Was it 10 or 11 hours difference ?

Yeh 10-11 hours for you (we are GMT+10) So are are about 15 hours ahead of the US which has a very unfriendly time zone for an aussie.

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

tommylight
Offline
Moderator

6 years 6 months ago #165291 by tommylight

Replied by tommylight on topic Hypersensing questions

I did recall, it is 11 hours as i said to a friend the day we spoke on the phone that you live in the opposite side of the world, literally !
Ooops, i did forget one L on recall, guess what autocorrect suggested !

The following user(s) said Thank You: rodw

Please Log in or Create an account to join the conversation.

rodw
Offline
Platinum Member

6 years 6 months ago #165322 by rodw

Replied by rodw on topic Hypersensing questions

Warning: Spoiler!

Attachments:

The following user(s) said Thank You: Uthayne, snowgoer540

Please Log in or Create an account to join the conversation.

Uthayne
Offline
Premium Member

6 years 6 months ago #165326 by Uthayne

Replied by Uthayne on topic Hypersensing questions

I did another bolt hole circle. Cut fine with no issues. Here's the data

Also include the .log files (renamed to txt) if you want to analyze it further

Attachments:

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540

Time to create page: 0.857 seconds