Forum Menu

QtPlasmaC release.

More
5 years 7 months ago #204155 by phillc54
Replied by phillc54 on topic QtPlasmaC release.

Franklin wrote: Thanks Phill, it already works great. I would like to know, are you planning to add a virtual keyboard in the "conversational" tab? For use touch display alone without a keyboard and mouse.

I will probably look at that in the future, I have only recently got a touchscreen for testing. Aat the moment I just use Onboard keyboard.

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago #204413 by tommylight
Replied by tommylight on topic QtPlasmaC release.
Sorry for rushing in, but earlier on i found 2 new topics about THC not moving/reacting/following material (was on another PC), and i did notice that after installing QtPlasmaC on the big machine yesterday, checked a bit today and sure enough it does react/move/follow, but at an abysmally slow rate even with PID settings set at maximum values.
Is there something i am missing ?
And LinuxCNC complains about old style debounce...
Later,
sorry
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc
The following user(s) said Thank You: phillc54

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago #204425 by tommylight
Replied by tommylight on topic QtPlasmaC release.
More info, this is with 2.9/Master updated today, same with build from two days ago.
www.youtube.com/@toma.cnc1
www.youtube.com/@toma.3d
www.youtube.com/@tomapc

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago - 5 years 7 months ago #204447 by phillc54
Replied by phillc54 on topic QtPlasmaC release.

tommylight wrote: Sorry for rushing in, but earlier on i found 2 new topics about THC not moving/reacting/following material (was on another PC), and i did notice that after installing QtPlasmaC on the big machine yesterday, checked a bit today and sure enough it does react/move/follow, but at an abysmally slow rate even with PID settings set at maximum values.
Is there something i am missing ?

I see that too Tom, oops, I think I broke it. I'll take a look today.


And LinuxCNC complains about old style debounce...

I have been meaning to get rid of that as well, I need to look around to see if I can find some more time...:)

EDIT: fix has been pushed
Last edit: 5 years 7 months ago by phillc54.

Please Log in or Create an account to join the conversation.

More
5 years 7 months ago #204462 by Clive S
Replied by Clive S on topic QtPlasmaC release.

I have been meaning to get rid of that as well, I need to look around to see if I can find some more time...:)


Phill You do realise you have a few hours in the middle of the night not being used. :pinch:
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
5 years 6 months ago #204465 by phillc54
Replied by phillc54 on topic QtPlasmaC release.

Clive S wrote:

I have been meaning to get rid of that as well, I need to look around to see if I can find some more time...:)


Phill You do realise you have a few hours in the middle of the night not being used. :pinch:


Haha, thanks Clive, it seems that I don't plan my day properly. :silly:
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Moderators: snowgoer540
Time to create page: 0.265 seconds
Powered by Kunena Forum