Another GUI project underway

Floris, I did not know G52 was implemented in master, that is great! We will certainly work on adding that.

eFalegname wrote: imho this is the best of all linuxcnc gui, I am excited to see it in action and if I can suggest something: I would add the G52 axis offset code (it's already working in linuxcnc 2.
Floris

I did not know either that G52 was now in master.. cool.. so that would go here you are saying?

eFalegname wrote: imho this is the best of all linuxcnc gui, I am excited to see it in action and if I can suggest something: I would add the G52 axis offset code (it's already working in linuxcnc 2.
Floris

I assumed from my reading it would go in the similar position to G92 so I added it in here:

Wow, that is impressive. By far and away the best LinuxCNC screen made to this point. Will definitely be switching away from Pathpilot once this is released!!

It looks like G92 and G52 offsets will always be identical. so possibly it just needs one column labeled "G52/G92"
But that is just from reading, and isn't based on any testing.

Andy, you are correct. I just tested and the G52 offsets show up properly in the G92 DROs. Thanks!