StepConf Wizard 589 topics

Stepper Configuration Wizard for Parallel Port

Forum Header

Subject	Replies / Views	Last Post
I run the wizard and get this read out Topic started 24 Apr 2010 16:28, by sully0400 Last Post 30 Apr 2010 04:52 by sully0400	Replies:3 Views:3832	sully0400 Last Post by sully0400 30 Apr 2010 04:52
Wire cut machine. Wich configuration do I need ? Topic started 06 Apr 2010 17:15, by Nicolas Last Post 26 Apr 2010 15:33 by Nicolas	Replies:7 Views:10k	Nicolas Last Post by Nicolas 26 Apr 2010 15:33
Error Main f1.f2.f3. tree selection Topic started 23 Apr 2010 20:11, by Richelsdorfite Last Post 24 Apr 2010 12:37 by Richelsdorfite	Replies:2 Views:5918	Richelsdorfite Last Post by Richelsdorfite 24 Apr 2010 12:37
Tangential control Topic started 19 Apr 2010 23:42, by Metallho Last Post 19 Apr 2010 23:42 by Metallho	Replies:0 Views:4431	Metallho Last Post by Metallho 19 Apr 2010 23:42
figuring out stepConf from mach3 Topic started 12 Apr 2010 13:05, by forSaleSticker Last Post 14 Apr 2010 06:00 by cmorley	Replies:5 Views:5908	cmorley Last Post by cmorley 14 Apr 2010 06:00
need Configuration for micromill 3000 - any help? Topic started 07 Apr 2010 13:04, by edpillinger Last Post 11 Apr 2010 10:43 by Rick G	Replies:8 Views:10.7k	Last Post by Rick G 11 Apr 2010 10:43
Working Metric Lathe configurations wanted Topic started 25 Mar 2010 17:53, by ArcEye Last Post 25 Mar 2010 17:53 by ArcEye	Replies:0 Views:3579	ArcEye Last Post by ArcEye 25 Mar 2010 17:53
PWM not quite working (trying again) Topic started 25 Feb 2010 18:32, by gordoflash Last Post 25 Feb 2010 18:32 by gordoflash	Replies:0 Views:4497	gordoflash Last Post by gordoflash 25 Feb 2010 18:32
Using only a L298 Topic started 03 Jan 2010 00:31, by NightFox Last Post 24 Feb 2010 19:43 by melsoft	Replies:4 Views:6983	melsoft Last Post by melsoft 24 Feb 2010 19:43
CNC lathe Topic started 24 Feb 2010 09:05, by Student_HA Last Post 24 Feb 2010 09:05 by Student_HA	Replies:0 Views:4046	Last Post by Student_HA 24 Feb 2010 09:05
Remote Extrernal Start Switch Topic started 22 Feb 2010 17:19, by sjcdcheu Last Post 23 Feb 2010 00:42 by sjcdcheu	Replies:2 Views:3607	sjcdcheu Last Post by sjcdcheu 23 Feb 2010 00:42
Issue with Config Wizard Topic started 14 Feb 2010 22:08, by Monotoba Last Post 16 Feb 2010 06:44 by Monotoba	Replies:4 Views:4170	Monotoba Last Post by Monotoba 16 Feb 2010 06:44
emc2 and itc cnc-v1.4 Topic started 15 Feb 2010 09:29, by mudrycnc Last Post 15 Feb 2010 13:55 by mudrycnc	Replies:2 Views:4357	mudrycnc Last Post by mudrycnc 15 Feb 2010 13:55
Motors Jitter and even Reverse at low speed Topic started 14 Feb 2010 21:59, by Monotoba Last Post 14 Feb 2010 21:59 by Monotoba	Replies:0 Views:4747	Monotoba Last Post by Monotoba 14 Feb 2010 21:59
No progress after using stepconfig. Topic started 03 Feb 2010 15:39, by grey1beard Last Post 10 Feb 2010 20:43 by grey1beard 1 2 3 4	Replies:32 Views:27.4k	grey1beard Last Post by grey1beard 10 Feb 2010 20:43
No Step pulses on any step axis Topic started 06 Feb 2010 10:37, by purwanu Last Post 06 Feb 2010 14:37 by purwanu	Replies:2 Views:4342	purwanu Last Post by purwanu 06 Feb 2010 14:37
"Test this axis/Run", and a limit switch Topic started 30 Jan 2010 15:56, by grey1beard Last Post 01 Feb 2010 12:21 by grey1beard	Replies:2 Views:4868	grey1beard Last Post by grey1beard 01 Feb 2010 12:21
Testing XYZ axis, and weird result (of course !) Topic started 27 Jan 2010 17:23, by grey1beard Last Post 31 Jan 2010 11:18 by grey1beard	Replies:3 Views:3997	grey1beard Last Post by grey1beard 31 Jan 2010 11:18
use digital input for machine-power Topic started 12 Jan 2010 21:40, by gironymo Last Post 14 Jan 2010 18:39 by BigJohnT	Replies:3 Views:5510	Last Post by BigJohnT 14 Jan 2010 18:39
reversing motor travel? Topic started 28 Dec 2009 03:23, by jhtitan Last Post 05 Jan 2010 13:15 by jhtitan	Replies:3 Views:4095	jhtitan Last Post by jhtitan 05 Jan 2010 13:15

Time to create page: 0.165 seconds