the SKR2 is the same price as the octopus for me, any thought on this board? it has a 32-bit ARM Cortex-M4 series STM32F446ZET6
Its pretty sweet, seems nicely done. I have the v1.1 (they just came out with another 2 versions the pro446 and pro429) I like that you can do 1 12-24v input for inductive sensor. I was lookin to pick up a fsystec spider to test because its got a few more 24v capable inputs and uses the smaller 446
the SKR2 is the same price as the octopus for me, any thought on this board? it has a 32-bit ARM Cortex-M4 series STM32F446ZET6
Cakeslob has this board and has been testing it. There is a bin file for it in the repo. It's still unclear if it's working correctly as I cannot test it myself. The clock settings are different to the F407 to get the 180Mhz clock. However the SKR2 bin will work, just at 168Mhz.
Everything short of compiling for the 407 does not work. Systematically trimming down the target_octopus to be the same as skr2, and to the point where it is the same as skr2 but compiled for 446 does not work. They all compile and load the firmware but no signs of life. So far the only thing that works is skr2 firmware with octopus config.txt . All the other firmwares (marlin/klipper/rrf/other 446ze mbed projects) as reference,everything seems the same as whats in the target. Tried a few clock configs to try and match skr2, but my knowledge is limited on the topic. Operating blind seems insane, but if it works with 407 compile, it should be close to working as 446 shouldnt it?
