Remora 1.0.0_rc released for testing

Yes Aaron, the config.txt is the same for both.

scotta wrote:

Hi, and thanks for the feedback regarding the 401 and 411. I'll need to note that the 407 is the supported chip version.

Porting to other STM chips will be more straight forward now, and I'm already looking into which STM32F1 board to get so I can start on this as well.
 

I think it could work on F417 but i didn't own a dev board with this MCU.
For the F1 i'm using a BTT SKR mini 1.1, paid 10$ for it on Aliexpress, i bought 2 at the time, i can send you one board if you are located in Europe. It's a STM32F103RCT6
 

works great on a STM32F405

gtt38 wrote:

scotta wrote:

Hi, and thanks for the feedback regarding the 401 and 411. I'll need to note that the 407 is the supported chip version.

Porting to other STM chips will be more straight forward now, and I'm already looking into which STM32F1 board to get so I can start on this as well.
 
I think it could work on F417 but i didn't own a dev board with this MCU.
For the F1 i'm using a BTT SKR mini 1.1, paid 10$ for it on Aliexpress, i bought 2 at the time, i can send you one board if you are located in Europe. It's a STM32F103RCT6
 

Thanks for the offer, but I'm in Australia so a little too far to ship. I've just orders a Mks Robin with the same MCU. It should be hear in a couple of weeks I hope. Extending to more STM32 chips does not look to onerous.

gtt38 wrote:

works great on a STM32F405

Great, do you mind posting a list of boards that you've tested? Make and MCU type.

It would be great to collate these and include them in the docs. Any suggestions for the naming convention for the binaries? At the moment there is an SKRV2 directory, but it sounds like this should be a little more generic.

good news my new main board came in
I bought a BIGTREETECH SKR Pro v1.2
it has a STM32F407ZGT6

I wont have much time to test it till monday. But i have my fingers crossed.