Probe panel for Axis GUI

More
1 year 3 months ago #332525 by COFHAL
Replied by COFHAL on topic Error M code
When I press any of the keys X0 YO ZO X this error Unknow command M: M130 appears. What could be the cause?

Please Log in or Create an account to join the conversation.

More
1 year 3 months ago #332534 by cakeslob
Replied by cakeslob on topic Probe panel for Axis GUI
instructions for that are in the readme
The following user(s) said Thank You: COFHAL

Please Log in or Create an account to join the conversation.

More
10 months 1 week ago #340459 by masawee
Replied by masawee on topic Probe panel for Axis GUI
how install and use if not newer before has understand code, or hal or ini or what all this need and what all have. and were have. not understand code.

Please Log in or Create an account to join the conversation.

More
10 months 5 days ago - 10 months 5 days ago #340544 by Routercnc
Replied by Routercnc on topic Probe panel for Axis GUI
Olá a todos.
Tentei usar o EasyProbe na minha fresadora CNC. Instalei seguindo o vídeo do Talla83, mas ao calibrar, aparece a seguinte mensagem: "A sonda já está ativada" ao iniciar o comando G38.2 ou G38.3, e ao zerar manualmente, aparece outra mensagem: "Código M desconhecido usado: M130..."
Anexei os arquivos .hal, .ini e Probe_postgui.
O que estou fazendo de errado?

 
 

File Attachment:

File Name: Probe_postgui.hal
File Size:8 KB

File Attachment:

File Name: eng-eth.hal
File Size:8 KB

File Attachment:

File Name: eng-eth.ini
File Size:6 KB
Last edit: 10 months 5 days ago by Routercnc.

Please Log in or Create an account to join the conversation.

More
1 month 2 weeks ago #349599 by Cayenne
Replied by Cayenne on topic Probe panel for Axis GUI
 

File Attachment:

File Name: EasyProbeError.txt
File Size:56 KB
Is it unrealistic to try and run this on 7.2.15 ?

Please Log in or Create an account to join the conversation.

More
1 month 2 weeks ago #349642 by Cayenne
Replied by Cayenne on topic Probe panel for Axis GUI
2.7.15

Please Log in or Create an account to join the conversation.

Time to create page: 1.230 seconds
Powered by Kunena Forum