Forum Menu

Mini wannabe datron build

More
1 year 10 months ago - 1 year 10 months ago #317793 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
 

There, moved to the front. 

Tiny motor to spin the mag I guess. with some sensors. or encoder. the 7i96s has an open encoder input since the spindle doesn't have one. Hm. Gotta think about that. On an ethercat version if just use a 50w absolute servo I guess.
Last edit: 1 year 10 months ago by ihavenofish.
The following user(s) said Thank You: tivoi

Please Log in or Create an account to join the conversation.

More
1 year 9 months ago - 1 year 9 months ago #317861 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
ATC action! :P



Should have animated the eyes. Oh well, next time.
Last edit: 1 year 9 months ago by ihavenofish.
The following user(s) said Thank You: tivoi

Please Log in or Create an account to join the conversation.

More
1 year 9 months ago #317950 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
Shiny!

   
The following user(s) said Thank You: tommylight, tivoi, besriworld

Please Log in or Create an account to join the conversation.

More
1 year 9 months ago #318147 by ihavenofish
Replied by ihavenofish on topic Mini wannabe datron build
Machine partially rebuilt.
Did wind up finding that one of the linear blocks was damaged. order some new ones. I lapped and realigned everything, so things should be more precise now too - better than 0.001" over the whole work area pre compensation. Hopefully by next weekend its all running again with the new spindle and vacuum. woo. 

 

Please Log in or Create an account to join the conversation.

More
1 year 9 months ago #318149 by rodw
Replied by rodw on topic Mini wannabe datron build
Nice. I could not find where you have told us what spindle you are using. Please share.

Please Log in or Create an account to join the conversation.

More
1 year 9 months ago - 1 year 9 months ago #318153 by tivoi
Replied by tivoi on topic Mini wannabe datron build
spindle is echo tech korean brand
hsk25 40krpm 4kw
Last edit: 1 year 9 months ago by tivoi.
The following user(s) said Thank You: rodw, ihavenofish

Please Log in or Create an account to join the conversation.

Time to create page: 0.111 seconds
Powered by Kunena Forum