2.7
04 Mar 2015 22:59 #56464
by Diederik
Hi,
I just updated to 2.7, now get the following error:
hm2/hm2_5i25.0: warning: sserial remote device 7i77 channel 0 has old firmware that should be updated
how and where? I know I need to flash it somehow, but I can't find any instructions on how to do this.
Kind regards,
Diekie
I just updated to 2.7, now get the following error:
hm2/hm2_5i25.0: warning: sserial remote device 7i77 channel 0 has old firmware that should be updated
how and where? I know I need to flash it somehow, but I can't find any instructions on how to do this.
Kind regards,
Diekie
Please Log in or Create an account to join the conversation.
05 Mar 2015 00:42 #56470
by PCW
www.mesanet.com/software/parallel/sserial.zip
Has the firmware and scripts for updating sserial remote firmware
Unzip and read the README file for instructions
Has the firmware and scripts for updating sserial remote firmware
Unzip and read the README file for instructions
The following user(s) said Thank You: Diederik
Please Log in or Create an account to join the conversation.
10 Mar 2015 18:54 - 11 Mar 2015 21:49 #56614
by Diederik
I tried to do everything as per instructions on readme, but keep getting the errors.
in terminal, I get the following:
ptd001@ptd001:~/sserial/utils/linuxcnc$ sudo ./update7i77
move 7I77 W4 and W12 to right hand positions
cycle 7I77 field power and 5V power and hit return
read: 3: arg count
updating 7I77 field I/O
insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/setsserial.ko': -1 Operation not permitted
update7i77d.hal:4: exit value: 1
update7i77d.hal:4: insmod failed, returned -1
See the output of 'dmesg' for more information.
ERROR: Module setsserial does not exist in /proc/modules
<commandline>:0: exit value: 1
<commandline>:0: rmmod failed, returned -1
<commandline>:0: unloadrt failed
updating 7i77 analog out
insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/setsserial.ko': -1 Operation not permitted
update7i77a.hal:4: exit value: 1
update7i77a.hal:4: insmod failed, returned -1
See the output of 'dmesg' for more information.
ERROR: Module setsserial does not exist in /proc/modules
<commandline>:0: exit value: 1
<commandline>:0: rmmod failed, returned -1
<commandline>:0: unloadrt failed
now move 7I77 W4 and W12 to the left hand positiona
and cycle field power and 5V power
ptd001@ptd001:~/sserial/utils/linuxcnc$
ptd001@ptd001:~/sserial/utils/linuxcnc$
Please tell me what I am doing wrong?
Thanks
in terminal, I get the following:
ptd001@ptd001:~/sserial/utils/linuxcnc$ sudo ./update7i77
move 7I77 W4 and W12 to right hand positions
cycle 7I77 field power and 5V power and hit return
read: 3: arg count
updating 7I77 field I/O
insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/setsserial.ko': -1 Operation not permitted
update7i77d.hal:4: exit value: 1
update7i77d.hal:4: insmod failed, returned -1
See the output of 'dmesg' for more information.
ERROR: Module setsserial does not exist in /proc/modules
<commandline>:0: exit value: 1
<commandline>:0: rmmod failed, returned -1
<commandline>:0: unloadrt failed
updating 7i77 analog out
insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/setsserial.ko': -1 Operation not permitted
update7i77a.hal:4: exit value: 1
update7i77a.hal:4: insmod failed, returned -1
See the output of 'dmesg' for more information.
ERROR: Module setsserial does not exist in /proc/modules
<commandline>:0: exit value: 1
<commandline>:0: rmmod failed, returned -1
<commandline>:0: unloadrt failed
now move 7I77 W4 and W12 to the left hand positiona
and cycle field power and 5V power
ptd001@ptd001:~/sserial/utils/linuxcnc$
ptd001@ptd001:~/sserial/utils/linuxcnc$
Please tell me what I am doing wrong?
Thanks
Last edit: 11 Mar 2015 21:49 by Diederik.
Please Log in or Create an account to join the conversation.
10 Mar 2015 20:40 #56618
by PCW
The following user(s) said Thank You: Diederik
Please Log in or Create an account to join the conversation.
10 Mar 2015 21:03 - 11 Mar 2015 21:49 #56622
by Diederik
ptd001@ptd001:~/sserial/utils/linuxcnc$ cd /usr/realtime-2.6.32-122-rtai/modules/linuxcnc/
ptd001@ptd001:/usr/realtime-2.6.32-122-rtai/modules/linuxcnc$ ls
5axiskins.ko counter.ko hm2_test.ko mux16.ko sim_encoder.ko
abs.ko ddt.ko hostmot2.ko mux2.ko sim_home_switch.ko
abs_s32.ko deadzone.ko hypot.ko mux4.ko sim_parport.ko
and2.ko debounce.ko ilowpass.ko mux8.ko simple_tp.ko
at_pid.ko edge.ko integ.ko mux_generic.ko sim_spindle.ko
axistest.ko encoder.ko invert.ko near.ko sphereprobe.ko
bin2gray.ko encoder_ratio.ko joyhandle.ko not.ko stepgen.ko
biquad.ko estop_latch.ko knob2float.ko offset.ko steptest.ko
bitslice.ko feedcomp.ko latencybins.ko oneshot.ko streamer.ko
bitwise.ko flipflop.ko lcd.ko opto_ac5.ko sum2.ko
bldc_hall3.ko gantrykins.ko limit1.ko or2.ko supply.ko
bldc.ko gearchange.ko limit2.ko orient.ko thc.ko
blend.ko gearselect.ko limit3.ko pci_8255.ko thcud.ko
boss_plc.ko genhexkins.ko lincurve.ko pcl720.ko threads.ko
charge_pump.ko genserkins.ko logic.ko pid.ko threadtest.ko
clarke2.ko gray2bin.ko lowpass.ko pluto_servo.ko timedelay.ko
clarke3.ko hal_ax5214h.ko lut5.ko pluto_step.ko timedelta.ko
clarkeinv.ko hal_evoreg.ko maj3.ko pumakins.ko time.ko
classicladder_rt.ko hal_gm.ko match8.ko pwmgen.ko toggle2nist.ko
comp.ko hal_lib.ko matrix_kb.ko rotatekins.ko toggle.ko
constant.ko hal_motenc.ko maxkins.ko rtapi.ko tripodkins.ko
conv_bit_s32.ko hal_parport.ko mesa_7i65.ko sample_hold.ko tristate_bit.ko
conv_bit_u32.ko hal_ppmc.ko mesa_uart.ko sampler.ko tristate_float.ko
conv_float_s32.ko hal_skeleton.ko message.ko scale.ko trivkins.ko
conv_float_u32.ko hal_speaker.ko minmax.ko scarakins.ko updown.ko
conv_s32_bit.ko hal_stg.ko modmath.ko scope_rt.ko watchdog.ko
conv_s32_float.ko hal_tiro.ko motmod.ko select8.ko wcomp.ko
conv_s32_u32.ko hal_vti.ko moveoff.ko serport.ko weighted_sum.ko
conv_u32_bit.ko hm2_7i43.ko mult2.ko setsserial.ko xhc_hb04_util.ko
conv_u32_float.ko hm2_7i90.ko multiclick.ko siggen.ko xor2.ko
conv_u32_s32.ko hm2_pci.ko multiswitch.ko sim_axis_hardware.ko
ptd001@ptd001:/usr/realtime-2.6.32-122-rtai/modules/linuxcnc$ sudo source installss
sudo: source: command not found
It seems like I do have setsserial.ko
ptd001@ptd001:/usr/realtime-2.6.32-122-rtai/modules/linuxcnc$ ls
5axiskins.ko counter.ko hm2_test.ko mux16.ko sim_encoder.ko
abs.ko ddt.ko hostmot2.ko mux2.ko sim_home_switch.ko
abs_s32.ko deadzone.ko hypot.ko mux4.ko sim_parport.ko
and2.ko debounce.ko ilowpass.ko mux8.ko simple_tp.ko
at_pid.ko edge.ko integ.ko mux_generic.ko sim_spindle.ko
axistest.ko encoder.ko invert.ko near.ko sphereprobe.ko
bin2gray.ko encoder_ratio.ko joyhandle.ko not.ko stepgen.ko
biquad.ko estop_latch.ko knob2float.ko offset.ko steptest.ko
bitslice.ko feedcomp.ko latencybins.ko oneshot.ko streamer.ko
bitwise.ko flipflop.ko lcd.ko opto_ac5.ko sum2.ko
bldc_hall3.ko gantrykins.ko limit1.ko or2.ko supply.ko
bldc.ko gearchange.ko limit2.ko orient.ko thc.ko
blend.ko gearselect.ko limit3.ko pci_8255.ko thcud.ko
boss_plc.ko genhexkins.ko lincurve.ko pcl720.ko threads.ko
charge_pump.ko genserkins.ko logic.ko pid.ko threadtest.ko
clarke2.ko gray2bin.ko lowpass.ko pluto_servo.ko timedelay.ko
clarke3.ko hal_ax5214h.ko lut5.ko pluto_step.ko timedelta.ko
clarkeinv.ko hal_evoreg.ko maj3.ko pumakins.ko time.ko
classicladder_rt.ko hal_gm.ko match8.ko pwmgen.ko toggle2nist.ko
comp.ko hal_lib.ko matrix_kb.ko rotatekins.ko toggle.ko
constant.ko hal_motenc.ko maxkins.ko rtapi.ko tripodkins.ko
conv_bit_s32.ko hal_parport.ko mesa_7i65.ko sample_hold.ko tristate_bit.ko
conv_bit_u32.ko hal_ppmc.ko mesa_uart.ko sampler.ko tristate_float.ko
conv_float_s32.ko hal_skeleton.ko message.ko scale.ko trivkins.ko
conv_float_u32.ko hal_speaker.ko minmax.ko scarakins.ko updown.ko
conv_s32_bit.ko hal_stg.ko modmath.ko scope_rt.ko watchdog.ko
conv_s32_float.ko hal_tiro.ko motmod.ko select8.ko wcomp.ko
conv_s32_u32.ko hal_vti.ko moveoff.ko serport.ko weighted_sum.ko
conv_u32_bit.ko hm2_7i43.ko mult2.ko setsserial.ko xhc_hb04_util.ko
conv_u32_float.ko hm2_7i90.ko multiclick.ko siggen.ko xor2.ko
conv_u32_s32.ko hm2_pci.ko multiswitch.ko sim_axis_hardware.ko
ptd001@ptd001:/usr/realtime-2.6.32-122-rtai/modules/linuxcnc$ sudo source installss
sudo: source: command not found
It seems like I do have setsserial.ko
Last edit: 11 Mar 2015 21:49 by Diederik.
Please Log in or Create an account to join the conversation.
Time to create page: 0.103 seconds