Boxford 125 lathe Tool Changer Comp FERROR (SOLVED)

Just a sec. Watch this space:

[edit]

Add this to your HAL:

net toolchanger-stepgen-fb <= stepgen.2.position-fb => toolchanger.stepgen-pos-fb

I'm sorry about that.

Aciera wrote: Just a sec. Watch this space:

[edit]

Add this to your HAL:

net toolchanger-stepgen-fb <= stepgen.2.position-fb => toolchanger.stepgen-pos-fb

I'm sorry about that.

Seems to be a success . Thanks you have been a massive help. I will put it all back together and give it some more tests.

I don't think the jog is working. I will have to check tomorrow.

Great, make sure you also try to change across multiple steps. Like 3-2 or 2-8. Before you put everything back together.

Aciera wrote: Great, make sure you also try to change across multiple steps. Like 3-2 or 2-8. Before you put everything back together.

Please please please gentleman's! I have same tool changer for years now, never been able to make it work (I’m not programmer + I’m dumb). So if you make on the end some simple guide how to implement it for simpleton like me, I will pay by gold…or, ask your price

*Love Switzerland especially Ticino
*I’m in Gloucester UK

garulus wrote: Please please please gentleman's! I have same tool changer for years now, never been able to make it work (I’m not programmer + I’m dumb). So if you make on the end some simple guide how to implement it for simpleton like me, I will pay by gold…or, ask your price

*Love Switzerland especially Ticino
*I’m in Gloucester UK

Ok is it on a boxford running linuxcnc 2.8

This one is running on a P/port.

I will upload the complete config in a few days.
I have had tremendous help from Aciera so not done it on my own.