Work with probe

psng/python is a folder with a bunch of python files it in. See below

image missing https://imgur.com/pKnPtG2l.png

I _think_ that the -u in the EMBED_TAB_COMMAND needs to point to an actual Python file, not to a folder.

linuxcnc.org/docs/2.8/html/gui/gladevcp....ladevcp:embeding-tab

Note also that there are two formats to embed a tab, depending on the user interface being used.

Good day.
I want to follow up on this thread and ask for advice.
I installed ProbeScreenV2 over the weekend. I use Linuxcnc 2.7.15 and UI Gammocapy 1.5.11. so far I have tried measuring and positioning with the application. all functions run ok, but the problem I have is that during the activity in the MIDI window I do not see the running script, although the called function is executed correctly. I don't know what the problem is.
also, the DRO window measures the position when the Probe Screen is started only if I have set zero values before starting the measurement. if I release two functionalities in a row, the window remains static - it does not measure values, although the probe will do what it has.
I tried to install ProbeScreen V1 with the same result, the functionality works, but I don't see the running script and after the second run the DRO is frozen.
can you please advise me what to try, set ..... to make it work correctly.
thank you very much
Jaro

Jaro wrote: but the problem I have is that during the activity in the MIDI window I do not see the running script, although the called function is executed correctly. I don't know what the problem is.

I think this is probably normal. The display is of the loaded G-code file, and does not switch to the running code when an external subroutine is running.

If you want to see the G-code execution for debugging you could try loading the relevant .ngc file from the probe "macros" folder. That might show the executing line while that routine is running. (but I have not tried this)

Hello, I have installed the probe screen V2 and everything is working except a fullscreen issue. When I run axis in full screen via the .axisrc I can see the output section of probe screen but I cannot minimize axis to access anything else on my computer. If I change this line in axisrc root_window.attributes("-fullscreen",1) by removing the -fullscreen then I can minimize axis but I do not have the output section of probe screen. I do not know if this is the setting I need to change. I think what I need to do is change the size of the probe screen. But, I do not know where to do this. I am running 2.7.10 on linuxmint 19. I have a 17" monitor with a resolution setting of 1600 x 900. if someone could point me in the right direction it would be surely appreciated. I have attached the .axisrc file.

Hello everybody,

I have installed the probe screen V2 and would like to use the jog keys stored there. However, these do not work. Transferring the data from GUIHUE / GitHUB also brought no change. What do I have to do to be able to use the jog buttons? Thank you in advance for your help.

Christian