RPI4 - Debian / LinuxCNC / EtherCAT / XFCE

File ethercat_1.5.2-32_source.changes of Package ethercat

build.opensuse.org/package/view_file/hom...rce.changes?expand=1

rodw wrote:

elovalvo's method to install qtvcp did not work for me, At least the install script ran perfectly instead of erroring. I was getting segmentation faults with qtplasmac, and other sample screens did not load.

 

The problem is related to the installation of lxde.

As suggested in
github.com/gnome-pomodoro/gnome-pomodoro/issues/344

you have to add in /usr/share/dbus-1/services/
the file named

org.freedesktop.Notifications.service

containing this


 

elovalvo wrote:

 

The problem is related to the installation of lxde.

As suggested in
github.com/gnome-pomodoro/gnome-pomodoro/issues/344

you have to add in /usr/share/dbus-1/services/
the file named

org.freedesktop.Notifications.service

containing this

Code:

[D-BUS Service] Name=org.freedesktop.Notifications Exec=/usr/lib/notification-daemon/notification-daemon

 
Excellent!, that did the trick!
 

ftree, we need to create
/usr/share/dbus-1/services/org.freedesktop.Notifications.service
with that content above

The QTPYVCP guys have been kind to us and have contributed a .deb file for vtk and a simple test file. Downloading the .deb file now. 477mb does not lend itself to being shared on the forum!

My little SSD filled up so I had to blow away all my vtk stuff except the wheel but it was looking for a missing module when I installed with pip.

So am stuck on vtk at the moment. Odd thing is I got it working once before.
I need to find some time on my work PC to rebuild the image and regroup...

Bumped the kernel to rt43. Writing the image now... wish me luck!

debian bookworm
kernel 5.15.40-rt43 with
lxqt 1.1.0
ethercat 1.5.2-32
linuxcnc-uspace linuxcnc-uspace-dev mesaflash
linuxcnc-ethercat
 

Cool!  Do you have a link?  I'll give it a try.